Want this question answered?
Use a magnet to remove all the iron filings, then using a cloth bag, add water to the sand and salt. The salt will dissolve in the water, leaving the sand in the cloth bag.
1. They can be separated by physical methods. 2. Iron can be separated by magnet and sand by dissolving in water.
mix the salt and sand into a glass of water. The sand would settle at the bottom of the glass, and the salt would dissolve into the water. pour off the salt water, wait for the water to evaporate, and you will be left with salt, and sand.
Sure, that's easy. First, pull out the iron filings with a magnet. Separate the pebbles by pouring the mixture through a grate, with holes large enough to allow the sand and salt to fall through, but not large enough to allow the pebbles to fall through. Finally, to separate the sand and the salt, just add water. The salt will dissolve, the sand won't. If you want to recover the salt in solid form, you can then boil away the water in the salt solution, and get your salt back. Done.
First you want to get the iron filings out. You do this with a magnet.Next, put the sand-salt mixture in water. Stir well to dissolve the salt, then pour off the water. (If you really want to be slick about it, rinse the sand in plain water.)Then put the salt water in a shallow dish and let it evaporate.
In solution, the salt will be dissolved in the water, the sand and iron will settle to the bottom of the container. Separate out the water, evaporate the water and the salt will remain, separate the sand and iron filings with a magnet.
Distillation for the two soluble liquids (which seperates them by their boiling point) and magnetism for the separation of iron pins and sand.
In solution, the salt will be dissolved in the water, the sand and iron will settle to the bottom of the container. Separate out the water, evaporate the water and the salt will remain, separate the sand and iron filings with a magnet.
we can separate salt and sand by solving the mixture into water salt is soluble but sand is not .
Clearly, a magnet will separate the iron filings from the mixture, leaving just the salt and sand. Then you could run water through that to dissolve the salt, leaving just the sand. If you collect the water and evaporate it, you'll be left with the salt.
Hold a magnet over it and the iron will fly out of the salt and stick to it, and the salt will stay there.
magnetic separation-the iron fillings are small and can be magnetize so, by using magnets you can able to separate sand from iron fillings
Use a magnet to remove the iron, a filter or screen to remove the sand, and a still to remove the salt.
filtration
Use a magnet to remove all the iron filings, then using a cloth bag, add water to the sand and salt. The salt will dissolve in the water, leaving the sand in the cloth bag.
1. They can be separated by physical methods. 2. Iron can be separated by magnet and sand by dissolving in water.
mix the salt and sand into a glass of water. The sand would settle at the bottom of the glass, and the salt would dissolve into the water. pour off the salt water, wait for the water to evaporate, and you will be left with salt, and sand.