Hold a magnet over it and the iron will fly out of the salt and stick to it, and the salt will stay there.
Remove the iron filings using a magnet (set aside)Mix the salt and sand with waterRun the mixture through a filter paper, leaving the sand (set aside)Boil the water until it evaporates, turns into a gas and runs through tubes to a separate chamber *remove the sand (set aside)remove the water (set aside)ALL DONE !(:*distillation-look up model
Use a magnet to remove the iron, a filter or screen to remove the sand, and a still to remove the salt.
First remove iron filings with a magnet. That leaves sand, salt and chalk dust. Add water which dissolves the salt, and filter leaving the sand and chalk dust on the filter paper. Put that back in water and add acid to dissolve the chalk dust (CaCO3) leaving the sand as a solid. Filter to obtain the sand. The chalk dust will now be in the acid as CO2 and H2O and the Ca salt of the acid.
Use a magnet to seperate the iron. Then, add water to dissolve the salt and float the sawdust. Skim off, sieve or filter the solution to seperate the sawdust. Let the water evaporate, leaving the salt behind.
It all depends on the substance and its physical properties. For example, salt water can be separated by boiling the water and letting the salt remain.
U can separate salt and iron filings from each other by using a bigger magnet . There are other ways too . You can also put both of the mixture in a cup of water and watch as the salt evaporate or disappear . But the iron filings will come to the top . Or spreading the mixture on a table and using a magnet to separate them .
Help me
When you add table salt and iron filings together, they do not react chemically. The salt and iron filings will remain as separate entities in the mixture.
you dont.
A magnet.
In solution, the salt will be dissolved in the water, the sand and iron will settle to the bottom of the container. Separate out the water, evaporate the water and the salt will remain, separate the sand and iron filings with a magnet.
To separate a mixture of sand, iron filings, and salt, you can use a magnet to remove the iron filings, then dissolve the salt in water and filter the sand out. Lastly, evaporate the water to obtain the salt.
1. Salt will dissolve in carbon disulphide 2. Now we have a mixture of iron filings sugar and carbon disulphide(salt dissolved in it) 3. Separate iron filings by magnet. 4. Remove the sugar by Decantation process. 5. Separate carbon disulphide and salt by distilation.
In solution, the salt will be dissolved in the water, the sand and iron will settle to the bottom of the container. Separate out the water, evaporate the water and the salt will remain, separate the sand and iron filings with a magnet.
Iron fillings can be separated: - with a magnet - after the dissolution of the mixture, by filtering
A heterogeneous mixture is a combination of two or more substances that are not uniformly distributed and can be visibly distinguished. To separate salt and iron filings, you can use a magnet to attract and pull out the iron filings, leaving the salt behind. Alternatively, you can dissolve the salt in water and then use filtration to separate the undissolved iron filings.
Use a magnet to remove the iron filings. The add water to dissolve the salt, and the aluminum filings will settle to the bottom of the container. Pour that salt water into a pan, heat it and evaporate the water, leaving the salt in the pan.