Sulfur is not soluble in water, sodium chloride is very soluble in water. Add water, and then pour through a coffee filter. When fully filtered, leave to dry.
by sublimation
Wash the mixture with water and separate the solid from the liquid, for example, by filtration. The sodium chloride will dissolve in the wash water, while the copper is left behind.
the sodium chloride mixed with water will remove its from the sulfur in fact, the sodium chloride or salt will dissolve in the water, leaving the sulfur undissolved.
To separate naphthalene balls from sodium chloride, simply add water until all the sodium chloride is dissolved. Then either filter, or just pour off the solution, and the naphthalene balls will be left behind. Naphthalene is very insoluble in water, and sodium chloride is very soluble in water.
first, add water to the mixture, barium chloride is soluble in water. then filter through and funnel and filter funnel. then add sodium sulphate, using the stove they will expand and separate. ( sodium cloride, and sand
which method will be used to separate sodium chloride and aluminium particals
You can use the technique of evaporation to separate the mixture of sodium chloride and water. By gently heating the mixture, the water will evaporate, leaving behind the solid sodium chloride.
Silver chloride is insoluble in water; filtration is a simple method.
Mix with water and filter, Cupric oxide will be filtered away while sodium chloride remains in the solution
- Separation by distillation: at 100 deg. C - Separation by evaporation: at any temperature above 0 deg. C.
I suppose that the best method is a repeated crystallization/recrystallization process.
Separation of sodium chloride from sea water is the most simple.
Sodium chloride help the precipitation and separation of DNA.
To separate a mixture of sodium chloride and ammonium chloride, you can use a process called sublimation. Ammonium chloride can be sublimated by heating the mixture, causing it to change from a solid to a gas. The sodium chloride will remain behind as a solid, allowing you to collect the ammonium chloride gas and then condense it back into a solid form.
Sulfur is extracted with carbon disulfide.Put sand and NaCl in water; sand which is not soluble can be separated from sodium chloride by filtration.
the salt(sodium chloride) wiil dissolve when put in water along with the rest of the mixture, leaving the sulfur all alone.
Sodium chloride is soluble in water.