0
What else can I help you with?
What should the primary jumper be set to On a primary IDE channel if a single hard disk is attached?
master if the ide cable has a single drive connection. if the ide cable has the master and slave connection. then set the drive to master with slave.
If a single hard disk is attached on a primary IDE channel what should the jumper be set to?
master if the ide cable has a single drive connection. if the ide cable has the master and slave connection. then set the drive to master with slave.
How big is a port glass?
there is no set measure for port
I need to change my NAT to open?
You will need to port forward your xbox. You can do this by going on a website called port forward. From there, you should then choose your router and what you want to port forward, in your case, Xbox live. After, you will see a guide, follow this and you are all set.
What symptoms would probably be present if a client's NIC was set to transmit data in half-duplex mode while the switch port to which it was attached was configured for full-duplex m?
Excessive late collisions
Where were the anchor chains that held the ship when it was in port?
The anchor chains that held the ship in port were typically secured to the ship's anchor, which was dropped to the seabed. Once the anchor was set, the chains would be taut, keeping the vessel stable and preventing it from drifting. Depending on the port, these chains could also be attached to mooring buoys or pilings for additional security. This arrangement ensured that the ship remained in place during its stay in port.
What port does utorrent use?
You set the port that uTorrent uses at Options>Preferences>Connection
You want to open a port any port to run a utorrent?
You want to open the port that uTorrent is using. You can set that port in uTorrent at Options>Preferences>Connection. Opening the port will greatly help speeds. To open the port, you need to set an exception in any firewall, software or hardware (router), on your system. This guide has info to help with that: http://www.techsupportalert.com/content/optimizing-torrent-speed.htm
What port was Hamlet set in?
elsinore in denmark
Easiest way to set up wireless router?
The wireless router should have a plug for a power cord, a WAN port, and a switch. The power cord should be plugged into a known good outlet. The WAN port will usually be connected to the modem using straight-through patch cable.
What is strong and weak entity set?
the enitity which is set primary key is said to be strong entity and the entity which does not set primary key is said to be weak entity.
What port titanic set sail from on fateful voyage?
Southampton
