Do not allow the high power objective to tough the lenses
1. Always carry the microscope in an upright position with two hands. One hand should support the base and the other should be on the on the arm. Use lens paper and lens cleaning solution to clean the lenses on the microscope. Paper towel will scratch the lenses. Use a soft cloth to clean other parts of the microscope. Lens cleaning fluid and paper is a must. Do not substitute paper towel, which is far too coarse and will scratch the lenses. Always set your microscope on a clean, flat surface. 5. Always remove slides from the stage and rotate the nosepiece to the lowest power before returning the microscope to its storage area.
Always remember to restate your thesis. Rephrase the thesis so that it isn't the same thing.
captured softly with strangeness and clean and clear the eye piece and adjust the setting of it very sincerely.
You don't have to its just to see the different cycles.
Always carry the microscope by putting one hand under the shoe-shaped base and grasping the curved stand that supports the tube and its lenses with the other hand. Everything should be in working order, clean and oil free of dust. If you have a slide with a prepared sample, place it on the stage of the microscope. To maintain the good condition of your microscope, first and foremost guard it from dust. Cover the microscope with a plastic hood when you are not using the instrument and always store it in its case. Clean the microscope carefully to avoid the scratch in the lenses. If some of the lenses have fingerprints, clean them either with lens paper or with some alcohol and a cotton swab. Rinse dirty slides and cover glasses in liquid detergent and warm water.
Do not allow the high power objective to tough the lenses
It sets or adjusts the coarse of a speciment in a microscope.
It sets or adjusts the coarse of a speciment in a microscope.
It sets or adjusts the coarse of a speciment in a microscope.
1. Always carry the microscope in an upright position with two hands. One hand should support the base and the other should be on the on the arm. Use lens paper and lens cleaning solution to clean the lenses on the microscope. Paper towel will scratch the lenses. Use a soft cloth to clean other parts of the microscope. Lens cleaning fluid and paper is a must. Do not substitute paper towel, which is far too coarse and will scratch the lenses. Always set your microscope on a clean, flat surface. 5. Always remove slides from the stage and rotate the nosepiece to the lowest power before returning the microscope to its storage area.
The purpose of the arm is to connect the tube to the base of the microscope. When carrying a microscope you should always have one hand holding the "arm" of the microscope and one supporting the base of the microscope.
The purpose of the arm is to connect the tube to the base of the microscope. When carrying a microscope you should always have one hand holding the "arm" of the microscope and one supporting the base of the microscope.
It sets or adjusts the coarse of a speciment in a microscope.
were safety glasses and drop the slide
The safety rules that we should always remember when burning candles is just that you have to always blow it out and never play around it or else you will cause the fire.
Always remember to restate your thesis. Rephrase the thesis so that it isn't the same thing.
captured softly with strangeness and clean and clear the eye piece and adjust the setting of it very sincerely.