Want this question answered?
Carbon build up in the throttle body.
dirt and gunk in linkages will cause accelerator to stick get some wd40 and spray on all moving parts if accelerator has a cable, renew cable as it will be clogged and rusted inside casing, making it stick
Listen to the engine. if it sounds like its working too hard, or if the accelerator pedal is really sensitive, its time to shift. If its bogging down, its time to downshift.
Nissan almera pedal sticking
Could be a bad throttle body
You stick your hand in the L drive, close your eyes, and hope for the best. God be with you.
Driving a manual car involves several fundamental steps. Firstly, ensure the car is in neutral by pressing the clutch pedal and shifting the gear stick to the middle position. Start the engine and gradually press the clutch while shifting the gear stick into first gear. Slowly release the clutch while gently pressing the accelerator to start moving. To change gears, lift off the accelerator, press the clutch, shift to the desired gear, and then release the clutch while gradually applying the accelerator again. Rem
Yes, to get an accurate reading the dip stick should always be screwed in.
Semi-Automatic. The gears are changed by machine, but the driver can decide what gear the car should be in.
If your standing at the front of the engine it should be in the back left, if it is a stick shift you wont have a a dip stick.
Only you can decide that. Though best friends do tend to stick together, otherwise they wouldn't be best friends.
its on the passenger side close to the firewall in the engine compartment. it should be a white stick that says engine on it.