Take a sample to a lab to get analysed.
You used the WRONG plastic - should have used PEX, not glued plastic for water supply line in a home !-If it was my home I'd remove it and replace with PEX.If you don't you may have to run water through for about a month to get rid of that taste.
It should be hooked to a cold line.
how deep should water line be from meter to house in Versailles Kentucky
Of course not. It depends what you argue about though. There is a very fine line between argument and debates. Often people argue about different tastes in things like music when they should just debate it.
technology tastes red as apple
The hot water line should be connected to the left and the cold water line should be connected to the right for proper functionality.
For connecting a refrigerator to the water supply, it is recommended to use a 1/4 inch water line.
If it tastes and smells sweet, you have a leaking heater core. If it is just water, you have a leak at the windshield or the A/C condenser drain line is clogged.
i have to drain out 4800 cusec of water
The whirlpool refrigerator water line diagram shows how to install and troubleshoot the water line for the refrigerator. It includes steps for connecting the water line to the refrigerator and troubleshooting common issues like leaks or low water flow.
The length of anchor line is called "Scope" by mariners. The scope of your anchor line should be 5 to 7 times the depth of water that you're anchored in. It should never be less than 3 times the depth. In other words if you usually anchor where the water is 20 feet deep you should have a MINIMUM of 100 feet of line.
There may not be one. You may have to shut the water off where it comes into the house or at the water heater. If there is one under the sink, it should be fairly obvious. Follow the supply line from the faucet.