i believe they're 15 mm the main bed bolts are 15 mm
but there are two 13 mm's, one on each of the frame rails, that also need to be removed. these are for the grounds of the wiring system and are very important to remember to hook back up up your truck WILL NOT start :)
What size are the bed bolts on a 82 s10 truck
there are 8 on a 6 foot s10 bed plus the filler neck
Beats me!
You need a 40 Torx screwdriver. Remove the two bolts holding each pivot point on the bed side of your S10, and the single bolt holding the out hinge on the gate itself. Put the new hinges on, tighten the Torx bolts. The Torx bolts seem to strip easily. You might consider changing them to Allen heads as part of the procedure.
you have a choice of dropping the fuel tank or removing bolts holding the bed to frame and sliding bed back to expose the top of fuel tank. pump is inside of fuel tank
What size are the speakers in a 1992 standard cab Chevy S10?
The Chevy S10 were small pickup trucks which were made from 1982-2003. The axle nut size for an S10 is 36mm.
235x70x15 this tire size on my 2001 s10 blazer
6
Yes it will.
Safely, 500lbs.
15mm is the closest thing i can find to fit, but still has a liottle slop on socket .Will definitely have to use a wrench on the front bolt, or cut it off.
YES, a king-size bed is larger than a queen-size bed.