answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: What size breaker do you need in the fuse box for a chest freezer?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where is polaris predator 500 fuse?

there isn't a fuse, before the starter solenoid there is a circuit breaker 20 amp, let me know if you need a diagram i need a diagram


i've lost power in one bedroom and lighting in adjacent bathroom,where do i start my troubleshooting?

The first thing you should try is your breaker box or fuse box you may just need to replace a fuse or switch a breaker back on.


Where can i get a cheap freezer?

You can find a cheap chest freezer at Lowe's. They have a wide variety that can hold just about anything you need. Best buy also has a few that are only a few hundred but they do not have large ones.


Disadvantages of a fuse?

When the blow you need to have a replacement on hand before you can try the device again. A breaker can just be reset.


What fuse do you need for your electric windows?

a circuit breaker is used for power windows most are 30 amp the reson is when you first hit the winsow button it will cause a power surge a blow the fuse the breaker will automatically reset if overloaded also if 2 people hit button at same time it will overload the fuse.


Can a refrigerator and a chest freezer be on same circuit?

You would need to check the power requirements for each appliance and compare them to the capacity of the circuit. But I wouldn't recommend it.


Why does a 20 amp breaker blow when it is only hooked up to a 100 watt bulb a small pump for a fish pond and a household freezer?

Either there is something drawing a lot more current, or the breaker is faulty. You may need to have an electrician check the breaker for you, or if you feel competent, replace the breaker with another of equal value. That would be a lot less expensive than having an electrician drop by. BUT... The startup current of a household freezer AND the "small pump" may add up to enough current that it's tripping the breaker. Read the labels and see what the actual current draw is on the pump AND on the freezer. If the total current approaches the value of the breaker it might be best to move something to a different circuit.


Why won't both Power Windows go down Would there be a fuse to check?

There is a resetting circuit breaker instead of a fuse on most models. On my 1995 there are two such reset breakers in my fuse panel and they are interchangable. You need to check to see if there is power going to the breaker. If there is no power on the other side then the breaker has likely failed open. You can jumper across the terminals and if the windows start working then you know the breaker is bad. Had a similar problem, turned out that the clips where the CB plugs in under the dash where not making a good connection with the breaker, just use a flat head and pry them closer.


Where is the fuse located on a 1993 Toyota Camry for the power windows?

most of the time the window fuse is located under the hood but it could aso be in the regualar fuse box but if not it would be in the fuse box uder the hood Fuse box is by drivers left knee. Above this are the flashers and about 3 inches above this is the circuit breaker for the windows and door locks. breaker is silver, about 1/2 by 5/8 inch and in the center is the button you need to push in to reset. I used an unbent paper clip to press it. Make sure unit is not energized. May need to unplug breaker first. Press in center button until it clicks.


Is it true or false that a circuit breaker must be replaced after a short circuit occurs?

A circuit breaker must be reset to ON after a short circuit but does not need to be replaced. It depends on the type of CB. A fuse is also a circuit breaker and it needs to be replaced after a short circuit. Relayed circuit breakers have to be "picked up" after a dropout and need not be replaced as such.


What number wire gauge for a single pole light switch?

In residential wiring applications the most used is 14 gauge wire for light switches as long as the circuit breaker or the fuse is 15A. If your lighting circuit is on a 20A fuse/circuit breaker then you need to use 12 gauge wire


What one is better fuse or circuit breaker?

IMO it would be because the circuit breaker has the possibility of going bad and not working (allowing a short to move through the device), but fuses blow (cause a break) no matter what if shorted.