The name plate, which is a metal plate on the back of the appliance with a lot of technical information on it, may tell you straight up what size the circuit needs to be. If it doesn't it will most certainly give you the wattage of the freezer. For single phase systems such as in a home, take that number, divide by the voltage, which gives you amps, and choose the next size larger breaker and corresponding wire size.
Home freezers run on 120 volts and require AWG #12 wire on a 20 amp breaker.
For a standard size refrigerator, a dedicated 15 amp circuit is used.
The wattage of the water tank is needed to size the breaker and the wire to feed the tank.
Normally AWG #10 wire on a 30 amp breaker but it really depends on the size of the pump. The pump manufacture will specify the size wire and size breaker needed.
A minimum of 15-amp breaker is "needed", but a 20-amp is often required by electrical code for that situation.
A 15 amp circuit breaker will handle this situation very well. The smallest home breaker is rated at 15 amp.
The 225 amps is the secondary output amperage. Look on the machines nameplate to find the input amperage. It is that amperage that is needed to size the feed wire and there the breaker size. When you find that amperage you may want to re question the breaker size.
In standard construction this would require a 15 amp breaker and 14 gauge copper wire.
To answer this question the wattage of the heater is needed.
Canada and US - Standard size breaker in home panel is 40 amps for stove. If not standard range open Discuss Question page.
Need to know what the wattage or the amperage is of the appliance. The load amperage is what governs the wire size and the breaker to protect the circuit.
Wire size is calculated from the amount of current the load draws. More information is needed. Voltage and amperage will do fine.
50 ft freezer how size compressor
20 amp In North America code states a two pole 15 amp breaker will do the job.