First, there is no way to answer your question properly, as you have not provided enough information. The following variables will all impact on the correct answer: -- How thick is the wall?
-- How high is the wall?
-- What type of material is the wall made of?
-- Is this an non-braced wall, or a braced wall?
-- Is the wall retaining earth?
-- What soil type?
-- What is the soil-bearing capacity?
-- What are your local building codes? - How much load due to roof or floor(s) does the wall support? After you have answered these questions, go to your local building official or design-professional for clarification. They will have other questions for you to answer. However, they will be impressed with your preparation. You will then possibly need a building permit and inspections.
....is the top of the foundation wall. Simple as that.
16inches above grade
It really all depends on the size of your crack. If you have a major crack, you need to call in an expert. If you have a minor crack you can go online and purchase DIY professional grade foundation wall and floor crack repair kits. Once you have fixed the crack you want to seal the floor and wall to strengthen the concrete and prevent future cracks.
you cant, you have to put the foundation down first, then put the wall on top of the foundation (like around the edge of the foundation)
Depends on stress and loading. adding it is a safe bet
When you need to know the total weight of of a wall, like when you want to know how strong the foundation of a building must be.
You need to know how long each wall is as well as how tall the room is. Also, you have specified the door size. Are there no windows?You need to know how long each wall is as well as how tall the room is. Also, you have specified the door size. Are there no windows?You need to know how long each wall is as well as how tall the room is. Also, you have specified the door size. Are there no windows?You need to know how long each wall is as well as how tall the room is. Also, you have specified the door size. Are there no windows?
The size of wall mount you need is around 50 inch wall mount or higher. For the sake of being sure, you may need to ask a professional for assistance on the subject. Good Luck on finding your answer.
The weight is 128 lbs and is to be wall mounted, you will need a hole in the wall that fits it.
All structures would benefit from having damp proof foundation as damp would cause tearing in the foundation structure and weaken it over long time exposure.
Level.
For a TV wall mount installation, you will typically need M6 or M8 screws, depending on the size and weight of your TV. Make sure to check the instructions provided with your wall mount for the specific screw size and type required.