Five ton
It is on the Drivers side fender. There are three relays on the outer fender very close together. One relay for airconditioner compressor clutch one for the fan. If the Fan does not work try turn the airconditioner on and it starts a minute later its not the fan relay. A temperature switch has most likely failed located by the thrermostat. Unplug the switch by the thermostat and the fan should automatically run when engine is started
down
The fan should be pointed outwards when placed in a window to help push hot air out and bring in cooler air from outside.
For optimal air circulation, a box fan should face outwards to draw in fresh air and push out stale air.
For optimal air circulation, the fan should blow out of the window. This helps to push hot air out and draw in cooler air from outside.
When determining the appropriate size for a ceiling fan, factors to consider include the room size, ceiling height, and the fan's blade span. A larger room may require a larger fan for optimal air circulation, while a lower ceiling may need a fan with a lower profile. The blade span should also be proportionate to the room size for efficient cooling.
For optimal air circulation, a fan should be facing out of the window. This helps to push hot air out of the room and draw in cooler air from outside.
To determine the appropriate fan light bulb size for this specific ceiling fan model, refer to the manufacturer's instructions or specifications provided with the fan. The recommended bulb size should be indicated in the manual or on the packaging. It is important to use the correct bulb size to ensure safe and efficient operation of the fan's lighting feature.
Replace fan resistor located in airconditioner evaporator box in behind glove box
This fan should be installed in a bathroom of no more than 100 square feet.
For optimal air circulation, a fan in a window should be facing outwards. This helps to push hot air out of the room and draw in cooler air from outside.
Loose connection?Bad fan motor (windings opening when they get hot)Loose fuse/relay?Bad or worn switch?Bad resistor?