0
What else can I help you with?
How do you remove the tail light assembly for a 1999 Dodge Intrepid?
in the trunk there are 3 plastic wing nuts take them off and the light will come out.
How do you get the tail light off of a Dodge Intrepid so you can replace a bulb?
There are three plastic nuts accessible from inside the trunk.
Is there a fuel pump access panel in the trunk of a 1994 Dodge Intrepid?
yes. pull up the carpet, remove 4 nuts and there is the pump module.
How do you put the driver side window 1999 Dodge Intrepid back on its slide track?
undo your door panle remove the to nuts that hold the window on the rail Slide Rail Back Put Window Downward Angle Pull The Window Out It Will Come Out Easy
Changing left rear tire on 94 Dodge Intrepid. Have car jacked lug nuts off and tire won't come off Is rear brake in way and how do you get it off?
The centre of the wheel is stuck. Just hit the tire with a big hammer and it should come off. You could try penetrating oil also
How do you change a tail light assembly for a 2001 Dodge Intrepid?
if entire left of right assembly, unscrew the 3 plastic wings nuts behind assy inside the trunk, pop out, disconnect harness
What is theTorque specs for 1998 dodge Dakota lug nuts?
torque specs. on lugnuts are usually around 90-100 ft.lbs.
What are torque specs for tie rod end nuts for 1998 Dodge Ram 3500?
I want to say 55Ft Lbs. but not pos.
Does the 1998 Dodge Durango have reversed lug nuts?
No, counter clockwise to loosen.No, counter clockwise to loosen.
How do you replace the tail light on a 2000 Dodge Intrepid?
From inside the trunk you remove the three or four finger nuts to remove the entire taillight assembly. Once you get it removed you'll see the light plugs on the backside.
How do you change shocks on 1998 dodge ram?
Undo top & bottom bolts & nuts & replace shocks. No major knowledge or tools needed
How do you change a brake light on a 1999 Dodge Intrepid?
This has been answered in other post in this series, but its easy. Open the trunk and unscrew 3 black plastic wing nuts that hold the tail light assembly onto the car. You have to take all 3 nuts off, the light assembly will come loose, then just twist the correct light socket 14 turn off and change the bulb. 2 of the nuts are easily seen the 3rd one is up in the top corner.
