8mm
And mine are stuck fast atm!
I have a 2002 tribute and it holds 16.5 gallons. I'd imagine a 2005 would be the same.
The Mazda B2500 engine holds approx 1.5 gallons of 15w-40 diesel oil
If its a v-6, plugs 4,5,6,are located under a plastic cover that covers the coils for each cylinder. This is what is called a coil on plug system.This cover is right in front between the radiator and the engine. 3 8-mm nuts or bolts should be holding this cover on. Remove the 8-mm bolt that holds the coil down, remove the coil and plug is down inside the socket. The plugs for cylinders 1,2,3, are under the intake that will have to be removed in order to get to them. lousy design!!!
The gas tank on the 2014 Mazda MAZDA2 holds 11.3 gal..
It is important to maintain the levels of fluids in a vehicle. This cars engine holds between 3 and 4 quarts of engine oil.
The 1992 Mazda b2600i holds 5.1 quarts of oil. When changing oil, add a little less than needed, then watch the dip stick until the engine is full.
AnswerMine holds anywhere from 13-15 gallons.----------------------------i have a 2003 mazda6 and it holds 18 gallons and says it in the owner's manual.
The spark plugs are beneath the cover marked Quad 4. This cover holds the ignition coils that spark the plugs. Remove the cover and you will be able to see the spark plug holes on the top.
Easy as pie. Remove the 2 black nuts at the front of the cover. Pull up the front edge and swivel the rear edge out of the clip that holds it down.
An engine mount holds an engine in place. It can also be called a motor mount if a motor is specifically referenced.
pritt stick
You will have to remove the cover that is on top the engine. You will find the plug wires there. You must remove the bolt that holds down the plug to the engine. The plugs are located deep down in the holes.