dont know we lost the screws moving
There is no standard for bottom stand screws. They will most likely be metric, and be 8,10 or 12 mm in size.
You do not need special bolts. Standard bolts and screws, as long as they are the correct size, can be used.
You will need a couple sizes mostly 4 inch ones.
The screw size needed for your Sony Bravia walmaount for a 32 inch is 6X16 MM screws. These are the screws that go into the walls.
The answer will depend on the size of the screws!
You need the stand size window opening of 2.5 feet by 2 feet.
what size screws to mount a 26' flatscreen
first u need a star screwdriver size 15....u need to take off all of the screws where the vents are then take the screws off under the vents...o yea there are screws on the side of the dash(u can get to them by opening the driver and passenger doors) and u need to take screws off in glove compartment
Depends which screws you are going to use. I usually use the #6 screws that come with blinds. They need no pre-drilling.
the centers of the fasteners,(screws) determine the hardware.
I cannot tell you the size of the holes but I can tell the type of screws you would need; M8, 1.25mm thread pitch. Min depth-0.67", max depth-1.38". Hope this helps!
Most TV stands are suitable for plasma TVs of any size, and therefore the screen size is not important. Of course, if the screen is very heavy, then a solid stand is needed.