My 93gmc z71 was 13/8 sae
i may be wrong, but if i recall correctly from high school automotives the wheel bearing has to stay with the wheel it was built for so you have to replace the whole wheel once again though i am not 100% on this
The axle nut is 1 11/16 in
i just changed my a couple months ago i believe its a 36mm socket.
To replace the front wheel bearing on a Ford Fiesta, you will need to remove the wheel. Then with a hammer you can pull the old bearing out.
you do not use a socket you use a wheel bearing puller to remove it from the hub Putting a right size socket into it and hitting it with a hammer can pop the bearing out, but it can also damage it so its advised to get the right tools. size 30 mm for the wheel nut and the bearing puller
Remove the tire and wheel from your Chevy Lumina. Remove the end of the axle. Remove the wheel bearing nut. Remove the wheel bearing seal and the wheel bearing. Reverse the process to install the new front wheel bearing.
The front bearings are sold as a hub/bearing assembly. procedure is pretty simple, remove wheel, brake caliper and rotor, axle nut, and 3 bolts attaching hub asm to spindle. no special tools, except large socket for axle nut, and possibly a torx socket for hub bolts.
The front wheel bearing torque setting on a Renault Clio ranges between 112 to 174 ft lbs. One needs to use a 30 mm socket on a 1 inch air gun to loosen the nut.
how do i change front wheel bearing of kia sorento 2003
how do I get to the front bearing on a geo 4 wheel drive
how to replace front wheel bearing on 1996 Hyundai elentra
How do you change a 1998 jimmy 4X4 front wheel bearing ?