cant remember for sure but its either 15 or 18 mill. there definitely metric
Changing brake rotors is pretty easy. One lifts the car, removes the tired, brake shoe and then the brake rotor. Next replace the brake rotor, put the brake shoe and tire back on the car and lower it back to the ground.
The brake rotor functions similar to the breaks on a bicycle. Each brake rotor contains a rotor and a brake pad. When the brake is applied, the brake pads squeeze the rotor, causing the wheels to stop.
front min spec is 30.08mm rear min spec is9mm
Changing brake pads can be easy once you do it once. You have to jack up the car so the tire is off the ground. Take off the tire. You will see a round ring which is the rotor. On top of the rotor are the brake pads. You will need a socket to take them off.
A brake rotor is what your brake pads squeeze to slow your car down. The brake pads are mounted in a caliper. When you apply the brakes, the caliper pushes the brakes into the rotor, which then slows down your wheel.Hi, It is a brake rotor, and is the physical disc of a disc brake. Peace, crigbyThe brake rotor is the disk part. Should be shiny from where the brake pads have been rubbing on it.
The rotor is the disc in the disc brake system.
Should be "peel off" rotors if not you will need a spanner socket only
Changing brake pads can be easy once you do it once. Jack up the car so the wheel is off the ground. Take off the tire. You will see a round ring which is the rotor. The pads are on top of the rotor. You will need a socket to take them off.
Rear is to the back of the vehicle. Brake rotor is the rotating part of a disc brake.
first measure the brake rotor then inspect the rotor surface inspect the brake pad surface if either is rough or irregular then replace the rotor you will have better brake performance and brake pad -rotor life thank you
I believe you need to turn a rotor or both rotors. They probably were not turned on your brake job It is cheaper to just replace the rotor than to have it turned, I have found this is a typical problem on the Catera
Warped brake rotor.Warped brake rotor.