Want this question answered?
The Mercedes-Benz C350 has the rare "side pin" wiper arms. See Sources and Related Links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages - note that not all wipers will fit on side pin arms so be sure to reference the make, model and year of your vehicle for the brand wipers you choose to purchase.
I took a few screws out of the front wheel well mud guard behind the marker light and reached in through there to remove and replace the side marker light.
All I did was remove the side marker lens by taking a small flat head screwdriver and pop it out. The side marker isn't screwed in so it comes right off. Then just remove the bulb by rotating counterclockwise.
On my 2002 Nissan Xterra I had to remove 4 screws from the front bumper and wheel well and then I was able to get to the back side of the side marker light and remove the nut in order to get to the light bulb.
On my 2002 Nissan Xterra I had to remove 4 screws from the front bumper and wheel well and then I was able to get to the back side of the side marker light and remove the nut in order to get to the light bulb.
To change the side marker lights on this model, remove the screws of under cover that attaches to the bumper. It would be easiest to do if the vehicle was lifted up in some way.
You have to remove front headlight piece (which is held by two screws). Once removed you will be able to see and reach the bulb connection on the back of the side marker. Hope this helps.....
The side marker bulbs on a 2002 Buick LeSabre are replaced by removing the retaining screws and disconnecting the wiring harness. The old bulb can then be removed and a new bulb put in its place.
its easy just put a liitle of preasure on marker light push forward . it should come out. do the reverse to put back on after replacing bulb.
You have to remove front headlight piece (which is held by two screws). Once removed you will be able to see and reach the bulb connection on the back of the side marker.
I changed the marker light today on my 98 Ford Ranger. There is two screws under the park light. Take both screws out and pull on the marker light and the park light at the same time. It will all come out at one time. That gives you axcess to your bulbs.
4 Screws, remove tailight unit, twist & replce infected bulb ......