Wire size is not dependent on voltage - it is dependent on current. Please restate your question and provide the expected branch current.
You use varistor wich has the max voltage for that aplication example:vacuumcleanermax allowed voltage is 240v ac so you chose aprox. 250 V varistor.
The sizing of a breaker is dependant upon the size of the wire it protects. The size of the wire is dependant upon what the load current in amps is. Without the amperage and wattage and the voltage of the appliances an answer can not be given. W = A x V, Amps = Watts/ Volts.
no, must be 3v
A wire rated to 12 v can be used for carrying a 12 v current if it has the same amperage. It is the amperage or the volume of electricity which determines the size of the wire rather than its voltage.
How i determine correct size varistor for protect system which work with 220 v AC?
You need to mention the current or connected load to define the size of the wire
both will be fused.
You need to know the amperage to size the wire. For 220 V at 20 A you would need 12 AWG. At 220 V at 30 A 10 AWG.
It is depending on : whether the ac power is 110 or 220 v , length of wire/cable from mains to CB(circuit breaker),diameter of wire/cable consumption of circuit ( How much watts the circuit consume) i.e load .. don't forget this relation I=V/R . where I= current (amps) , V=voltage & R= resistance also I=P/V where P is power in watts . note that less voltage or thinner wire may affect the real rating of CB
Information is incomplete. You need to know the load in Watt or Kilowatt and the voltage on the secondary side to determine the load current, on which the size of the wire is designed.
Could be either the 5.2L or the 5.9L both are V-8's
12 guage. The most current that can be sustained in 12 Ga wire is 20 Amps. Almost all 12 Ga wire sold for home use can handle 600 volts, so your 220 v A/C is covered. The voltage rating should appear on the jacket of the wire sheath.