The sound pressure or its level can be harmful if it is moving too much your eardrums.
"Permitted Exposure Time Guidelines - SPL"
Sound pressure level Lp and permissible exposure time t:
115 dB = 0.46875 minutes (~30 sec)
112 dB = 0.9375 minutes (~1 min)
109 dB = 1.875 minutes (< 2 min)
106 dB = 3.75 minutes (< 4 min)
103 dB = 7.5 minutes
100 dB = 15 minutes
97 dB = 30 minutes
94 dB = 1 hour
91 dB = 2 hours
88 dB = 4 hours
85 dB = 8 hours
82 dB = 16 hours
Lower dBs are said to be harmless.
100 times intensity.
There is not a set level for everyone. It is recommended that a sound level of 90 decibels not be continued longer than 8 hours. Also, OSHA prohibits exposure to sounds louder than 115 decibels without hearing protection.
in decibels and you can get hi-tech equipment that can tel you the intensity of the sound in decibels and hertz
decibels
Sound is measured in decibels
Any sound which is over 80 decibels and continual will damage a persons hearing, any sound above 89 decibels and ear protect must be worn if the noise is continual or permanent deafness becomes a high risk - regardless of where or from what the sound comes from. 100 decibels is about the noise of a plan leave.
Decibels are a measurement of the loudness of sound.
100 times intensity.
A quiet conversation is about 60 decibels. The sound of rustling leaves is about 40 decibels. The sound of a mosquito at 3 meters is said to be about 1 decibel.
Decibels
in decibels and you can get hi-tech equipment that can tel you the intensity of the sound in decibels and hertz
There is not a set level for everyone. It is recommended that a sound level of 90 decibels not be continued longer than 8 hours. Also, OSHA prohibits exposure to sounds louder than 115 decibels without hearing protection.
decibels
A sound at 15 decibels is not very load. It is equivalent to the sound that watch makes when ticking.
Sound is measured in decibels
Take a sound pressure level meter and measure it. 95 decibels means over the is 0 decibels is the threshold of hearing. 95 decibels means the measure over 0 decibels.
Decibels