At the speed of light- about 186,000 miles per second.
electricity travels at the speed of light +186,000 miles per second
The electrical current for a home device travels in a circuit.
The electrical current (or signal) travels at about 2/3 the speed of light in a vacuum - that is, it travels at approximately 200,000 km/sec. Note that individual electrons move slower than that.
chemical energy
The speed of a current is about 2/3 the speed of light in a vacuum - in other words, the current travels at a speed of about 200,000 km/sec. This is independent of the frequency.AnswerAlthough the effect of an electric current is felt, more-or-less instantaneously along the length of a conductor, the individual charge carriers move very slowly in the direction of that current. In fact an individual electron is unlikely to travel the length of a flashlight's filament during the lifetime of its battery.
Electrical force is related to speed through the concept of current, which is the flow of electric charge. The speed at which charged particles move in a circuit determines the strength of the electrical force acting on them. Greater speed leads to a stronger electrical force.
The speed of an electric current is determined according to v = I/nAQ (average speed equals current divided by the number of charged particles moving, the cross-sectional area of the conductor and the charge of the particles). This basically means that a normal current e.g. the current in a house's wiring travels at about walking pace.
electric current
In a typical conductor like copper wire, electrical current travels at near the speed of light, which is about 186,282 miles per second (299,792 kilometers per second). However, the movement of individual electrons within the wire is much slower, typically on the order of millimeters per hour.
An ammeter is an instrument that measures electrical current as it travels through a conduit. Amperes are what the measurements that are are measured aree called.
Nothing will happen. It requires two wires to complete the circuit. Electrical current travels from the battery terminal through the wire to a metal portion of the base of the lightbulb. The current then travels up through the filament wire which glows as the current travels through. The current then travels back down the other side of the filament wire to the base of the bulb and thus through the second wire back to source, which is the battery.
The current flowing in an electrical circuit.