its a car and a dog and a mouse
On a pedestal drill the workpiece is static and the drill is in a vertical position and rotates. On a lathe the workpiece rotates but not the drill, and the drill is in a horizontal position.
Using a drive plate on a lathe requires removing the chuck and the drive plate is attached in its place onto the spindle.
Yes, It can be achieved by using a knifing tool.
Milling in a lathe can be two things:A cutter is gripped in the chuck and a workpiece the the tool post. The work piece is then milled by using the feed on the lathe. Although it has been done, it is an unconventional method and is not recommended.A 3-in-1 lathe with a milling attachment as part of the machine used for milling a work piece.
Actually, there are 2 classifications of turning operations...It can be classified as External operations and internal operations.In external operations are:1. Turning-(including steps, tapers, contours, and chamfers)2. Facing3.Grooving4. Cut-off-(also called parting)5. Thread cutting-(also called screw cutting)while in Internal operations are:1. internal drilling2. Boring3.Reaming4.Tapping-(internal thread cutting)
Stuff like circle things!
A cylindrical job can be done by using a lot of turing operations. A lathe turning operation is done using a machinery. There are many different parts to a turning tool. Some examples of a turning tool are left-hand turning tool and the right hand turning tool.
Turning refers to rotating a part around one of its axis, then using a cutting tool to change its diameter. The machine tool designed to carry out turning is the lathe.
Using a traveling steady will minimize vibration or chattering.
On a pedestal drill the workpiece is static and the drill is in a vertical position and rotates. On a lathe the workpiece rotates but not the drill, and the drill is in a horizontal position.
Woodturning is a form of woodworking done on a lathe. A lathe is a woodworking tool that spins a piece of wood at a relatively high rate of speed. The purpose of spinning wood is to form a symmetric shape using tools or sandpaper.
Normally performed using a lathe.
Using a drive plate on a lathe requires removing the chuck and the drive plate is attached in its place onto the spindle.
Yes, It can be achieved by using a knifing tool.
Milling in a lathe can be two things:A cutter is gripped in the chuck and a workpiece the the tool post. The work piece is then milled by using the feed on the lathe. Although it has been done, it is an unconventional method and is not recommended.A 3-in-1 lathe with a milling attachment as part of the machine used for milling a work piece.
facing is the proccess of reducing length of the work piece. it is done using cross slide. the tool is fed using the carriage.
Actually, there are 2 classifications of turning operations...It can be classified as External operations and internal operations.In external operations are:1. Turning-(including steps, tapers, contours, and chamfers)2. Facing3.Grooving4. Cut-off-(also called parting)5. Thread cutting-(also called screw cutting)while in Internal operations are:1. internal drilling2. Boring3.Reaming4.Tapping-(internal thread cutting)