311.2 K.
2.022 Pa*s @ 25⁰C http://en.wikipedia.org/wiki/Viscosity#Viscosity_of_various_materials
The tempering temperature for class 12.9 fasteners (such as bolts and screws) is 380°C to achieve the desired combination of hardness and toughness in the material. This specific temperature helps to refine and balance the microstructure of the steel, improving its mechanical properties and performance under load. Deviating from this recommended tempering temperature can lead to suboptimal properties in the fasteners.
When it is the night it can be -160degrees C and 100 degrees C when it is day
380 degrees Celsius = 716 degrees Fahrenheit.
380 degrees C.
ITS IN SOILD
The surface of Pluto can range from a low temperature of 33° Kelvin (-240° C or -400° F) to a high temperature of 55° Kelvin (-218° C or -360 °F). The average surface temperature on Pluto is 44° Kelvin (-229°C or -380° F).
Land: anywhere from -89.4 to 70.7 C Ocean: anywhere from -18 to 380 C
Aluminum alloy 380 has one of the lowest melting temperatures among aluminum alloys, typically around 520°C (968°F).
A 400 MCM copper conductor with an insulation temperature factor of 90 degrees C is rated at 380 amps.A 500 MCM copper conductor with an insulation temperature factor of 75 degrees C is rated at 380 amps.These conductors can have either 600 or 1000 volt insulation rating depending on what the system voltage in use is.
Plutos temp is -223 c to 40 c
The difference in temperature between 28°C and 25°C is 3°C. This is calculated by subtracting the lower temperature (25°C) from the higher temperature (28°C). Therefore, the temperature difference is 28°C - 25°C = 3°C.