What the purpose of a standby switch on a guitar amplifier?
to heat up the tubes in certain amplifiers , when the tubes are heated up you get a better sound and the tubes last longer is what I've been told.
remember to change your tubes and have them adjusted on a yearly bases to keep the amp sounding great if you're an experienced player this really comes in handy. Get a pro to do it the first time so nothing bad happens.
Are effects pedals for the electric guitar for the amplifier because you found one with overdrive which you want because the amplifier you are getting does not have overdrive?
When an object is pluged into a socket with the switch on but the object not switched on dose it use any electric?
It could be many of problems it could be that there is a break in the alpha loom, the jack socket could have broken, switch could have gone, if you have active pick ups the battery could need changing. if the alpha loom breaks its an easy fix but requires a little amount of skill with soldering and knowing what goes were with a diagram. when something goes wrong with one of my guitar wiring…
All electric guitars have this switch but it varies from guitar to guitar. it is called the pickup selector switch. It is used for deciding on which pickup to use on the guitar. On a les paul style guitar it can be used to select the neck (traditionally rythm pickup), bridge (traditionally used for lead) and both pickups together. =================== That's what it is on a normal Gibson Les Paul. But on a Gibson Les…
If you mean the Guitar Hero III guitar then there are two switches on the back. The one just below the neck of the guitar (It looks like a quarter of a circle.) detaches the neck so you can store the guitar AND the neck in a smaller space, and the switch towards the side of the guitar detaches the faceplate so you can put a different faceplate on, or play without a faceplate.
The term double-throw means that the operator can place or "throw" the switch into two different positions. One position feeds power from the utility system to the load. The other position feeds power from the standby generator to the load. Such a switch will prevent electricity, generated by the standby unit, to flow simultaneously to both the customer's home or farmstead, and to the utility's system.
What is the problem with a laptop when every time you push its switch on it automatically turns off?
It's purpose was to act like an amplifier and a switch. Without any moving parts, vacuum tubes could take very weak signals and make the signal stronger (amplify it). Vacuum tubes could also stop and start the flow of electricity instantly (switch). These two properties made the ENIAC computer possible.
1.go to the krusty krab 1. 2. enter krusty krab and talk to plankton. 3.talk to musician near krusty krab 1. 4.go to chum bucket. 5.avoid robotic SpongeBob and take all patties. 6.take the red bulb in the room after the floating patties. 7.go to krusty krab 1 again. 8.take amplifier and guitar from near the musician. 9.enter the krusty krab 1. again and go to the storage room. 10.take the speaker. 11.combine the bulb…