Tosh335
I think they do
No , it drains things .
There would be block drains located on each side of the block very close to the engine mounts.
Every block has one (L4 or L6) or two (V6 or V8) coolant drains. Not always easy to access.
just put in in the bin. Don't try flushing it because they can block the drains.
There is 1 on each side of the block, they will be in the center just above the oil pan where it bolts to the block. It takes a 1/2 inch 6 point socket to remove them.
It depends on what year you have. Some are in the back of the head and others are in the block where the block coolant drains are located. Some have one knock sensor and others have two.
There are block coolant drains on both sides of the block. Drivers side block drain is towards the front and the passenger side is towards the rear. They take a large allen wrench to unscrew.
Kitchen drains get blocked for various reasons:There might be a rough bit of piping in the drain. Gradually small things get caught there and eventually build up a blockage.Something large went down your sink and got caught on a bend.Hot water and melted grease runs down the drain. When the grease hits the cold pipes it congeals and forms a layer on the side of the drain, like cholesterol in your arteries. Gradually this builds up.Make sure nothing goes down your kitchen drains except water. That is the solution.
Most all engines have block drains for coolant. If they are reasonably accessible or not is the probelm.
Drains may be installed along window pillars
When you open drains