There are block coolant drains on both sides of the block. Drivers side block drain is towards the front and the passenger side is towards the rear. They take a large allen wrench to unscrew.
drain coolant from radiator, remove one of the frost plugs in engine block, install block heater in place of frost plug, refill radiator with coolant.
One on each side of the block about center of the block just above where the oil pan touches the block. Plug is 9/16
The 2002 Tacoma engine block will have two coolant drain plugs on each side of the block. The coolant drain plugs will be near the front and the rear of the engine block.
It is located in the front of the vehicle. You can use the users manual or talk to a mechanic to get assistance.
the fuse block is on the driver side of the engine compartment at the rear,like inside the fender.
The coolant drain plug on a Nissan Micra engine block is on the upper part of the block. It is under the intake manifold.
On the 6.0L it is located on the back of the engine block below the valley/intake manifold.
where is the coolant drain plug on the engine block of Honda ACCORD 2.4 2006
Coolant enters the water pump from the lower radiator hose. The water pump pumps coolant into both sides of the engine block towards the rear of the block. Coolant then flows up into the cylinder heads and flows toward the front of the heads before crossing over into the intake manifold and up to the thermostat. Coolant then flows through the thermostat into the upper radiator hose back into the radiator.
The engine block coolant drain plug on 4.3 liter Chevy Blazer is located on the bottom of the engine, near the oil filter. It allows coolant to be completely drained from the block during maintenance.
There is coolant in the engine block when the engine is not running. The engine block, heater, hoses and radiator remain full when engine is not running.
The engine block coolant plug on a 6-cylinder is near the bottom of the engine. You will need to use a socket set and ratchet to remove the plug.