It's for painting concrete or brick.
Yes, it can.
Bricks blocks or stone
Linseed oil is generally taken from flax seed. In years past it was used in paint and as a preservative for wood, iron and masonry. Its use as a part of paint is seeing a resurgence in the historic preservation of older structures.
First wash it off to remove any dust, then paint it with masonry paint . Available in Home Depot or Rona
As long as it is architectural or house paint, you can use it in a bathroom. However, an exterior grade paint will not wash or scrub as well as a paint formulated for interior use so a 100% acrylic interior paint in an eggshell or glossier sheen would be recommended.
Paint or Stucco
All manufacturers provide all the information in their products. But there are no information (e.g. the tool are came from the old toolbox). The best practice is don't used the core bit in masonry. Maybe you can used it in wood as wood is softer the concrete.ANS 2 - The way to tell the difference is that masonry bits all have an arrow like piece of carbide across the point of the bit. This sticks out slightly from the shaft,
Masonry refers to brick and cement. If you have to drill a hole in that kind of material, just put the masonry bit in your drill, and you can drill the hole in exactly the same way that you would drill a hole in wood, it works the same way.
It can be used on concrete or many of the modern fake concrete boards like Hardibacker.
Yes, it should be. The required undercoat/primer is available in Home Depot,less than $20 last time I used it.
Go to http://www.masonryworktools.com/paintingbrickmasonry.html == ==
The process of stripping a painted wood surface is called paint stripping. Usually, it involves chemically removing the paint, sanding the wood, and then repainting the wood.
A type of masonry heater, which is a wood burning appliance wich uses the mass of masonry to store heat.