answersLogoWhite

0

it will get all non sticky and it will be all watery so what to do is put more glue it about how much detergent you put that how much glue you put let say i use 3 in a half cups of detergent ok? now i gotta put 4 in a half cups of glue then it will be ok

or simpley just restart :)

info: you will need elmers glue( liqiud )

two cups make sure ther small and the same

and spoon to stir

detergent (any kind doesnet matter)

mixing boil or use the cups

:) put glue into a cup then put detergent into the other cup not the same one with the glue in it it should be any amount of glue but only 3 half of detergent or it depends on how much glue you put. then mix then together (glue and detergent) and stir till you get putty!! :D enjoy

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

What is in silly putty?

Silly Putty is made primarily of silicone polymers along with other ingredients such as boric acid and coloring agents. Silicones give it its unique properties, allowing it to be stretchy and moldable.


How To Make Silly Putty Without Borax?

You need: glue laundry detergent (liquid) bowl (or something to mix in) spoon (or something to mix with) food coloring (optional) Here's what you do: Put some glue into your bowl (the amount doesn't matter; you can put in however much you want) and add the food coloring in. Stir. Pour some detergent into the cap and SLOWLY add it while stirring the mixture. Put in more or less detergent to get it to the consistency that you want it. ENJOY! Tips: Put in more detergent if your mixture is too runny. Put in more glue if your mixture is too hard to stir. IMPORTANT: Store in a ziploc baggie to keep plyable and soft. You don't want it drying out!:)


Is a silly putty a solid liquid or gas?

There is many formulas for putty. The putty with the fallowing ingredients of: water, glue, borax solution, and if you want to add, food coloring is a liquid. I know this because, the putty takes the shape of its container, and has all the other properties of liquids. Read bellow for the instructions on how to make it. What you'll need: 2 containers (1 smaller than the other, preferably a film canister) Water Food colouring PVA glue Borax solution (ratio of about 1 Tbsp of borax to a cup of water) Instructions: Fill the bottom of the larger container with PVA glue. Add a few squirts of water and stir. Add 2 or 3 drops of food colouring and stir. Add a squirt of borax (possibly a bit more depending on how much PVA glue you used). Stir the mixture up and put it into the smaller container. By now the mixture should be joining together, acting like putty, crazy putty!


How do you get glue off caesarstone?

To remove glue from Caesarstone, you can first try scraping off as much of the glue as possible using a plastic scraper or putty knife. Then, gently rub the remaining residue with a cloth dampened with warm soapy water or a mild cleaner recommended for Caesarstone surfaces. Avoid using abrasive cleaners or tools that could damage the surface.


How can I effectively remove carpet glue from concrete surfaces?

To effectively remove carpet glue from concrete surfaces, you can use a combination of scraping, heating, and chemical solvents. Start by scraping off as much glue as possible with a putty knife or scraper. Then, use a heat gun or a steamer to soften the glue and make it easier to remove. Finally, apply a commercial adhesive remover or a mixture of warm water and vinegar to dissolve the remaining glue. Be sure to follow safety precautions and ventilate the area while working with chemical solvents.


How can I effectively remove carpet glue from concrete?

To effectively remove carpet glue from concrete, you can use a combination of scraping, heating, and chemical solvents. Start by scraping off as much glue as possible with a putty knife or scraper. Then, use a heat gun or steam to soften the remaining glue, making it easier to scrape off. Finally, apply a commercial adhesive remover or a mixture of warm water and vinegar to dissolve the glue residue. Be sure to follow safety precautions and ventilate the area while working with chemical solvents.


How can I effectively remove carpet glue from a concrete floor?

To effectively remove carpet glue from a concrete floor, you can use a combination of scraping, heating, and chemical solvents. Start by scraping off as much glue as possible with a putty knife or scraper. Then, use a heat gun or hairdryer to soften the glue, making it easier to scrape off. Finally, apply a commercial adhesive remover or a mixture of warm water and vinegar to dissolve the remaining glue. Be sure to follow safety precautions and ventilate the area while working with chemical solvents.


Will cloths detergent kill mature trees?

It would depend on the detergent and how much was used.


How much glue is in an Elmers glue bottle?

An Elmer's glue bottle typically contains 4 fluid ounces of glue.


How can I effectively remove carpet glue from concrete floors?

To effectively remove carpet glue from concrete floors, you can use a combination of scraping, heating, and chemical solvents. Start by scraping off as much of the glue as possible using a putty knife or scraper. Then, use a heat gun or a steamer to soften the glue, making it easier to scrape off. Finally, apply a commercial adhesive remover or a mixture of warm water and vinegar to dissolve any remaining glue residue. Be sure to follow safety precautions and ventilation guidelines when using chemical solvents.


How much does silly putty cost?

a dollar at the dollar store.


Can you glue on top of dried glue?

Yes, but it may not achieve much.