Not much you can do but strip it and repaint.
top clear coat
Yes, clear coat peeling is a problem on a lot of GM cars in the 80's and 90's. Some claim they had a problem with their primer and others believe it was because the EPA mandated certain chemicals be removed from the paint.
yes, only on the driver's side t-top
take the car to the dealer and demand a new paint job, this is due to lack of a good clear coat during the painting of the car.
My nails ARE NOT PEELING OFF!! MAYBE YOURS ARE!!
If peeling you can scrape it off with a razor blade. Sand the remaining paint with 400 grit. Sand/feather the edges that don't scrape off. "Clean" and add 3 coats (progressively more each time) of Clear. There is an item sold in spray cans called "Peel"at paint shops but it will remove the paint too.
If peeling you can scrape it off with a razor blade. Sand the remaining paint with 400 grit. Sand/feather the edges that don't scrape off. "Clean" and add 3 coats (progressively more each time) of Clear. There is an item sold in spray cans called "Peel"at paint shops but it will remove the paint too.
The clear coat that would protect a quadding helmet is the Maxima SC1 Clear Coat.
Clear coat is applied over a base color for the gloss
If peeling you can scrape it off with a razor blade. Sand the remaining paint with 400 grit. Sand/feather the edges that don't scrape off. "Clean" and add 3 coats (progressively more each time) of Clear. There is an item sold in spray cans called "Peel"at paint shops but it will remove the paint too.
To effectively repair peeling drywall, start by removing any loose or peeling sections. Next, apply a coat of joint compound to smooth out the surface. Sand the area once the compound is dry, then apply a second coat if needed. Finally, prime and paint the repaired area to match the rest of the wall.
There is no, one way, to make maniures last. If the manicure was done properly, then it should stay for awhile. I got a bad manicure and on the same day it started chipping and peeling. But, if it does seem to start peeling and chipping you could put a clear, top coat on. It may last longer. I wish you the best! -Eugenie