The prism does this.
3rd brake light or rear brake lights?
A prism
You will need a compatible BMW scan tool to reset this service light from the I drive system.
You will need a compatible BMW scan tool to reset this service light from the I drive system.
A brake spring tool is used for the removal and replacment of springs utilized in drum brake assemblies.
A multimeter is a good tool to check for a short in the brake light. Put one end of the meter on one side of the wire near the brake light. Put the other end on the metal that is around the bottom of the bulb. If the bulb does not light up, there is a short. If the bulb lights up, there is no short in the wire.
= What tool to remove a front brake pads on a 2007? =
a brake caliper tool (really)
The check engine light is on because the ECU has detected a problem with the emissions system. The brake light can be on because there is a problem with the brake system. Can be as simple as the parking brake has not been fully released or the master cylinder is low of brake fluid. Have the ECU scanned with an OBD2 scan tool which will retrieve the code that has been set. This code will tell you what part of the emissions system is being effected.
The term "Spectrophotometry" refers to an instrument that is often used to determine the intensity of the various wavelengths in a spectrum of light. This tool is a part of analytical chemistry.
The function of a brake scan tool is used to scan the ABS codes. The ABS codes will help diagnose the problem one is having with their brakes. A brake scan tool can be purchased at any parts store such as NAPA.
I believe the brake light switch is at the base of the brake pedal. However, it takes a special tool usually to remove and replace it. It is a cheap part, easy labor, and worth the payment to a professional if they will do it for under $20.00 or so. You can strand yourself if you can't get the replacement on correctly. Mary