might just be pins
front caliper two bolts on back of caliper one on top one on bottom remove both bolts an pull caliper up an off rotor that's all
Remove wheel Re-install 2 lug bolts to hold rotor in place Remove flexible brake line Remove caliper mounting bolts Slide caliper off rotor
Remove the wheel, locate the Caliper. On the inner side there are 2 bolts going through the caliper, remove those (before removing use a flat head screwdriver to compress the caliper some) remove caliper. If you are removing the rotors remove the 2 large bolts on the caliper bracket.
Disc brakes? Remove wheel Remove caliper mounting bolts Slide caliper off rotor Remove rotor Re-install caliper and mounting bolts A special tool (not expensive available at Sears or Auto parts) is required because piston is threaded and must be screwed fully into caliper body Replace inner and outer pads Remove caliper mounting bolts Install rotor Re-install caliper PUMP BRAKE PEDAL TO SET PADS AGAINST ROTOR PRIOR TO MOVING VEHICLE
pull the wheel off, remove the two caliper bolts, remove the caliper and the rotor can be removed
Remove wheel Remove caliper mounting bolts Slide caliper off rotor Rotor should slide off hub Remove wheel Remove caliper mounting bolts Slide caliper off rotor Rotor should slide off hub
Remove the two bolts and use a screwdriver against the hub and caliper.
Most vehicles: it is secured by 2 mounting bolts Remove these and caliper should slide off rotor
Remove the wheel, remove the two caliper bolts and hang the caliper with a wire or bungee cord: you don't want any pressure on the brake hose. Then remove the two caliper carrier bolts and remove the carrier. The rotor just slides off after that.
It depends on the vehicle, some vehicles have star headed bolts, some have just regular hex head bolts different sizes, that hold the caliper over the rotor. All you have to do is remove the two bolts that hold the caliper, and then lift the caliper off of the rotor gently.
Two mounting bolts at rear of caliper - then slide caliper off rotor
Remove wheels Remove caliper mounting bolts Slide caliper off rotor Peel rotor off hub