answersLogoWhite

0


Best Answer

Diggers in the gold rushes (Australian and American) used the following equipment and methods to find gold:

  • Panning involved the use of a solid pan. An amount of potentially gold-bearing dirt was placed in the pan with some water, and gently swished and shaken around, a process which would bring the smaller particles of gold to the surface.
  • Cradling involved a wooden box loosely resembling a cradle. The cradle was used for sifting through larger amounts of sediment to find gold, and was popular from the early times of the goldrushes. It required at least two men to work. The cradle had a grate and a sieve. The dirt and sediment to be sifted through was emptied onto the grate in the cradle. The cradle was rocked quickly back and forth (in the action of a cradle) while water was poured over the sediment to help work it through. The grate stopped coarser stones from going through, while the fine material was sifted out the other end. The gold would be left behind for easy collection.
  • Sieves were also popular. They were like a pan but with a mesh base through which the water would drain, to help separate gold from similar sized particles.
  • Windlass was one of the slower methods of mining for gold. Two people were required to operate it, one at the surface and one in the mine shaft. The person in the shaft filled a bucket with potential gold-bearing soil and rocks, and the person on the surface operated the windlass to wind up the bucket. The contents of the bucket were then sorted through, perhaps in a cradle or a pan.
  • Long Toms were like cradles, but they used paddlewheels to make sure there was a continuous flow of water. This method was used in America, but rare in Australia.

Other tools included utensils for digging and carrying gold-bearing soil. They included basic equipment for survival, for constructing some sort of shelter, or simple protection. These included:

  • shovel
  • pick
  • rope
  • saw
  • axe
  • pick
  • wheelbarrow
  • knife
  • gun

If you found a large gold mine, the tools and equipment above are not enough. You should break the rock or stone, and separate the gold from others. The tools and equipment are crusher, ball mill, flotation cell and others.

User Avatar

Wiki User

8y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

9y ago

Pans used for panning, cradle, picks, sieves, etc. were equipment's used on goldfields. Later windlass, poppet head and winch were used in shaft mining. Stamper batteries which were large machines were also used on the goldfields.

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

Diggers in the gold rushes used the following equipment and methods to find gold:

  • Panning involved the use of a solid pan. An amount of potentially gold-bearing dirt was placed in the pan with some water, and gently swished and shaken around, a process which would bring the smaller particles of gold to the surface.
  • Cradling involved a wooden box loosely resembling a cradle. The cradle was used for sifting through larger amounts of sediment to find gold, and was popular from the early times of the goldrushes. It required at least two men to work. The cradle had a grate and a sieve. The dirt and sediment to be sifted through was emptied onto the grate in the cradle. The cradle was rocked quickly back and forth (in the action of a cradle) while water was poured over the sediment to help work it through. The grate stopped coarser stones from going through, while the fine material was sifted out the other end. The gold would be left behind for easy collection.
  • Sieves were also popular. They were like a pan but with a mesh base through which the water would drain, to help separate gold from similar sized particles.
  • Windlass was one of the slower methods of mining for gold. Two people were required to operate it, one at the surface and one in the mine shaft. The person in the shaft filled a bucket with potential gold-bearing soil and rocks, and the person on the surface operated the windlass to wind up the bucket. The contents of the bucket were then sorted through, perhaps in a cradle or a pan.
  • Long Toms were like cradles, but they used paddlewheels to make sure there was a continuous flow of water. This method was used in America, but rare in Australia.
Other tools included utensils for digging and carrying gold-bearing soil. They included basic equipment for survival, for constructing some sort of shelter, or simple protection. These included:
  • shovel
  • pick
  • rope
  • saw
  • axe
  • pick
  • wheelbarrow
  • knife
  • gun
This answer is:
User Avatar

User Avatar

Wiki User

9y ago

Diggers in the gold rushes used the following equipment to find gold:

  • Panning involved the use of a solid pan. An amount of potentially gold-bearing dirt was placed in the pan with some water, and gently swished and shaken around, a process which would bring the smaller particles of gold to the surface.
  • Cradling involved a wooden box loosely resembling a cradle. The cradle was used for sifting through larger amounts of sediment to find gold, and was popular from the early times of the goldrushes. It required at least two men to work. The cradle had a grate and a sieve. The dirt and sediment to be sifted through was emptied onto the grate in the cradle. The cradle was rocked quickly back and forth (in the action of a cradle) while water was poured over the sediment to help work it through. The grate stopped coarser stones from going through, while the fine material was sifted out the other end. The gold would be left behind for easy collection.
  • Sieves were also popular. They were like a pan but with a mesh base through which the water would drain, to help separate gold from similar sized particles.
  • Windlass was one of the slower methods of mining for gold. Two people were required to operate it, one at the surface and one in the mine shaft. The person in the shaft filled a bucket with potential gold-bearing soil and rocks, and the person on the surface operated the windlass to wind up the bucket. The contents of the bucket were then sorted through, perhaps in a cradle or a pan.
  • Long Toms were like cradles, but they used paddlewheels to make sure there was a continuous flow of water. This method was used in America, but rare in Australia.

Other tools included utensils for digging and carrying gold-bearing soil. They included basic equipment for survival, for constructing some sort of shelter, or simple protection. These included:
  • shovel
  • pick
  • rope
  • saw
  • axe
  • pick
  • wheelbarrow
  • knife
  • gun
This answer is:
User Avatar

User Avatar

Wiki User

11y ago
  • The people in the gold rush used a number of tools equipment, such as, shovels, picks, rope, saws, axes, wheelbarrows, etc
This answer is:
User Avatar

User Avatar

Wiki User

11y ago

What did they take to the goldfields

This answer is:
User Avatar

User Avatar

Wiki User

12y ago

d o n t k n o w :(

This answer is:
User Avatar

User Avatar

Wiki User

10y ago

James Marshall

This answer is:
User Avatar

User Avatar

Wiki User

6y ago

Picks, shovels, washing pans, cradles.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What Gear did miners use in the gold rush?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

When did gold miners use the shaft and windlass?

1849- California Gold Rush!


What transport did miners use during the gold rush?

mining cart


What was the equiptment the gold miners had to use?

They had to use a Pickaxe


What do miners use to find gold?

Tools that miners use to find gold are basically included utensils for digging and carrying gold-bearing soil, such as:shovelpanpickaxeknife/ chisel


What tools do miners use to find gold?

Tools that miners use to find gold are basically included utensils for digging and carrying gold-bearing soil, such as:shovelpanpickaxeknife/ chisel


What did the gold rush use to get to the gold?

The California Gold Rush used...PansLong TomsCradlesshovels


How did the gold miners get the gold from in the cave's?

They use Picaxes to pic the gold off of the caves


What did gold miners use as shleter?

they would use tents or a brick cottage


What equipment did the gold rush use?

The full answer depends on which gold rush you're talking about. But if you're referring to the most famous gold rush in America that occurred in 1849 in California, then most of the miners were prospecting for placer gold (as opposed to hard rock mining, where the gold is trapped inside the rock). For placer mining, the miners mostly used: - picks and shovels (to loosen and gather gold-bearing dirt for processing) - gold pans (to separate gold from the dirt) - sluice boxes (to separate gold from the dirt) - rocker boxes (to separate gold from the dirt) For hard rock mining, a lot of other equipment is needed, such as dynamite, to get the ore, crushers to crush the ore, mules and mining carts to haul the ore, mining hats and carbide lanterns, etc.


How did the miners mine the gold?

they got the Jews to mine it and use alchemy to convert it to gold coins


What are people who find gold called?

They were called the gold minersBack then they use to go to mines and mine for gold.That is why they were named gold minersgold mines-where they mine for goldgold miners-people who mine for gold


How did people use their gold in the California gold rush?

they sold it for money