Want this question answered?
Bit of a tricky one ... It all depends on the condition of the cylinder head. If the cylinder head is warped then replacing the head gasket won't solve your problem. A warped cylinder head can be skimmed (if not too badly warped). If the cylinder head is badly warped then it would be much easier to replace the head than fit another engine.
Overheating or head bolts not properly torqued down when assembled.
usually there is a blown head gasket or warped head to get water in a cylinder
A cracked/warped head, Blown head gasket, cracked cylinder wall, or cracked/warped intake manifold.
Need more background info. Cracked, or warped head. Gasket installed incorrectly.
blown head gasket,cylinder head not torqued to specs. cracked/warped cylinder head.those are some causes.
bad head gasket , warped or cracked head
Bad head gasket , warped or cracked cylinder head
sounds like a blown head gasket, warped head, or cracked cylinder
If the check engine light is blinking , that indicates a cylinder misfire has been detected White smoke coming out of the exhaust ( especially when the engine is warmed up ) indicates that coolant is getting into an engine cylinder from a bad head gasket , a warped or cracked cylinder head
Head gasket damage and/or warped block and/or cylinder head.
Yes , engine coolant can get in an engine cylinder from a bad head gasket , a warped or cracked cylinder head , a bad intake manifold gasket etc. ( P.S. I'm not a mechanic / technician )