That is not a job you can do by yourself. All 2008 Chryslers will need to have that job done at either the dealership you bought the car from, or a local auto repair shop. It is too risky to do that job yourself.
You can find hobby tools for miniature model airplanes at http://www.hobbytools.com.au/. It really depends on what material you are working with. You might need some woodworking tools which would include carving tools.
whats tools do i need to replace my rear struts on my 95 camaro
You'll need to remove the heads and have a machine shop replace the valves, and possibly valve seats. Replacing valves is NOT a job for your average do it yourselfer. Even if the seats are fine, you need special tools to cut them for the new valves. You will also need to use lapping compound to seat the new valves to the new, or re-cut seats. If you want it done right, just pull them off and take them to the machine shop.
The attic fan broke down and I'm wondering what tools I would need to replace the attic fan with a new attic fan?
Common hand tools. Boxed end wrenches is what you need.
Basic hand tools should be enough.
how do i replace the fuel pump and the tools i will need
No, you can easily replace the LCD yourself with a few common tools.
The tools you would need to replace front brake pads are, a wrenche (size varies depending on vehicle type), a clamp tool, and brake pads.
You can replace the drive on your PlayStation, but only if you are comofortable with disassembling electronics.
Do you need any special tools.
It depends what is the problem. Broken/bent valves usually means you need full machine shop work to see if the head is repairable. If only leaking valve seats, you can hand lap the valves yourself if you have the tools and equipment. But in any event, you may require special tools to adjust the valves after the head is installed if you do the work yourself.