When you push the brake pedal.
on the brake pedal under the dash is a brake light switch. that when you depress the brake it turns your lights on. you might wanna check that
The part of the car that turns on the brake lights when you apply pressure to the brake pedal is called the brake switch. Releasing pressure from the pedal causes the brake switch to break its electrical contact, turning off the lights.
check the brake pedal, there is a switch on the back of the pedal that depressed when the brake is depressed that turns the lights on, when this is loose it keeps the lights on.
More than likely there is a switch near the top of the brake pedal that is faulty. It usually looks like a small button that is released when you press on the brake pedal which turns on the brake lights.
If emergency brake is on 1 click it turns daytime running lights off. Pull out on emergency brake handle and see if this fixes the problem.
It turns the rear brake lights on as a safety feature. The brake pedal is pushed in, causing the fluid to move forward in the brake cylinder,activating a brake light switch. Even if the vehicle is off, the lights will still come on.
That would tell me that your battery is not dead because you do not need the car turned on for your brake lights to operate
Possible bad switch on the brake pedal? When you push on the brake pedal, it activates a switch, that switch turns on your brake lights. If the bulbs and fuses are ok, check the switch with an ohmeter.
Follow the brake pedal up behind the dash. The pedal arm ususally operates a button that turns on the lights when the pedal is pushed. The button could be stuck.
I would check the running lights for one with a short. I had the same sort of thing with my trailer and I spent way to much time troubleshooting the brake and signal wires. Turns out a running light bulb connector was grounding out on the trailer and messing it all up.
If parking lights stay on after the car is turned off on a 2001 Hyundai Elantra than the brake switch is malfunctioning. The brake switch turns off when pressed in and if it does not work the lights of the vehicle will stay on.
if you pull up ever so slightly on the e-brake the lights wil go out. carefull not to engage the brake while moving. but just lifting it a little will engage a sensor that turns out the lights.