0
The most common ones are RG59 and a low loss cable is RG 6,both are 72 0hm for tv sets and antennas.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What type of cable is used for a radio antenna?
fibre optical cable
How do you glue bx cable to steel beam?
You don't glue BX cable to steel. If it has to go on a beam, you usually hold it on with plastic 'tie wraps'. --------------------------------------------------------------------- Wire ties are not recommended for mounting armored bx cables to steel beams. Wire ties are normally used for bundling wires together to keep them neat, though some glue on cabinet tabs are made to mount wires inside control cabinets. These are not meant for external wire mounting. Cast aluminum clamps are made that hold the bx cable to the beam. a hole must be drilled in the beam to mount the clamps with screws, OR specially made mounting clamps (similar to c-clamps can be mounted to the edge of the beam, then the clamps mounted to those. It is recommended there be no less than one clamp every 6 feet (~2 meters).
Formula for working out cable size?
There is actually no specific formula used to work out cable size. In order to determine the type of cable you need and the size you need, you need to know the source of the supply, the voltage of the system, the ambient temperature, and the method you plan on laying out the cable.
What is a safety rule for g clamps?
used to hold peices of wood togheter
What is armored cable made from?
Armored electrical cable contains insulated electrical service wires protected by a flexible steel covering. Unarmored electrical cable has no protective flexible steel covering, its covering is made of plastic. <><><> Armored cable (BX) is the older version of Metal Clad cable (MC). It was flexible steel covered wire that used the steel as it's Ground. BX was a poor grounding system so it was replaced with MC which looks similar but has a separate Grounding conductor. MC is most often made with aluminum as its cover. Armored cable if used today will refer to MC type wiring. <><><> Some kinds of armored cable are in fact made to a tougher standard than the ordinary soft wire strand types of shielded cable that are used for hooking-up antennas. The 'armor' is actually a thin flexible metal film that better protects the wire or wires inside from damage in high use or high traffic areas. Such kinds of armored cable are also used in radio frequency assemblies in electronic equipment.
What type clamps do you use a corbin pliers for?
They're used for removing clamps on washing machine hoses.
What was the first type of armor used in the middle ages?
it was chainmail
What is clamp used for in science?
There are many types of clamps used in science: rubber tubing pinch clamps, screw clamps that hold laboratory apparatus in place, dissecting clamps, voltage clamps used in measuring cell membrane potentials, etc. Each has a different function and different use. It really isn't possible to clearly answer your question without knowing the type of clamp you want to know about.
What type of cable is used for a radio antenna?
fibre optical cable
What industries are hydraulic clamps used in?
Hydraulic clamps are used in robotics, large-scale manufacturing, or any other type of heavy repetitive machinery work. There are many uses for hydraulic systems. These systems can be used in the automotive industry.
Yes, Its the same type of cable used by satellite TV installers.?
Yes, Its the same type of cable used by satellite TV installers.
What type of RJ45 UTP cable is used between switches?
Crossover cable
What type of cable would you to create a ring topology?
what type of cable would you used to create a ring topology?
What type og cabling is used for cable modems?
Coxial cable is used from the wall to the modem. From the modem to the computer an RJ-45, or ethernet, cable is used.
What is used for connecting a peripheral device with a cable that has Type A and Type B connectors?
Type a and type b connections almost always refer to a USB Cable.
What type of cable would be used for feed in to cable box?
Coaxial, RG-59.
What type of cable should be used to connect switch to hub?
You need to use a straight type of connection. 568A or 568B depending which type your network is using.
