answersLogoWhite

0

A zener diode passes drect current, and the point of a zener diode is that the voltage across it stays nearly constant over a range of different currents, so it can provide a supply of stabilised voltage.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

What is the difference between rectifier diode and zener diode?

A: They are both diodes. The difference lies in the application. A rectifier is used to rectify AC current into pulsating current. The zener diode is used to regulate a voltage source to the zener voltage when connected in the reverse direction. ************************************************************** If you look at the characteristic curves of a rectifier diode and a zener diode, you will see that they are similar, but the reverse curve of the zener has a much sharper bend at what is called the "knee". It is at this point on the zener's curve at which it operates.


When current through a zener diode increases by a factor of 2 by what factor does the voltage across the zener diode increase?

If the zener diode is in zener breakdown the voltage across the zener diode remains constant regardless of current (for the ideal zener diode). Real zener diodes have parasitic resistance that causes the voltage across the zener diode to increase slightly with increased current, but due to temperature dependant variations in this parasitic resistance as well as temperature dependant variations in the zener breakdown voltage, this change in voltage in real zener diodes cannot be described by a simple linear factor.


Can zener diode be used as fan regulaters?

A: NOT VERY WELL a zener requires to support booths its breakdown current and the fan current essentially the zener is a voltage regulator not a current regulator


From theory you will remember that the zener diode is used in the?

Provided the zener has enough current through it it will control the voltage for a load.


Does a zener diode acts as a switch?

A zener diode cannot be used as switch.


What is zener diode and for what it is used?

Zener Diode is nothing but a Crystal P-n junction diode in which the P type and n-type layers are heavily doped.Zener diode is mainly used as voltage regulator its forward charaqcteristic is same as normal p-n junsction diode but its reverse Characteristic is different that when the reverse region reaches knee region in spite of changes in current the voltage remains the same


What is the function of zener?

zener diode is a revers bias diode which used for voltage regulation.


What is a zener diod?

A Zener diode is a type of diode that sends current in the forward way like a normal diode, but also in the reverse direction if there is voltage that is larger than the breakdown voltage which is also known as "Zener voltage". The apparatus was named after Clarence Zener, who discovered this electrical property.


What is the smallest load resistor that can be used and still maintain regulation in zener diode regulator?

The smallest load resistor that can be used while maintaining regulation in a zener diode regulator is determined by the zener diode's minimum load current (I_Z(min)) and the zener voltage (V_Z). The load resistor (R_L) must be calculated using Ohm's law, where R_L = V_Z / I_L, ensuring that I_L is at least equal to I_Z(min) to keep the zener in the breakdown region. If the load current falls below this threshold, the zener diode will not regulate the output voltage effectively.


Which diode used for signal amplification zener or schottky or tunnel or none?

The diode that has a negative resistance region in its voltage-current curve.


What is the difference between p n junction and zener diode?

The difference between the pn-junction diode and the zener diode is that the pn-junction diode is used for rectification while the zener diode is used for rectification and stabilization. Also, the zener diode can function in the breakdown region while the pn-juntion diode can not function in that regime.


Can zener diode used as rectifier?

Yes **************************************** Yes they can but there are pitfalls. A normal diode will have a high reverse breakdown voltage. A zener has a relatively low breakdown voltage (its "zener"voltage). If a zener diode is used as a rectifier it must have a zener voltage at least twice the peak of the applied a.c.