0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Why is submerged arc welding referred to as submerged?
Submerged arc welding is called "submerged" because the high voltage electrical current (called the "arc") that heats the metal and wire to weld together is submerged underneath layers of granular earth materials called "flux". About 50% to 90% of this flux can be re-used and fed back into the system with the proper equipment.
What is the purpose of makefile?
it is used for re-compilation of your source file
What is the difference between schematics for air core and iron core transformers?
Air core inductor: This inductor is used when less value of inductance has to be generated. A carboard or plastic former(core) is wound with the wire(the coil) and the maximum magnetic flux is lost and thus less flux is linked with the coil. hence the inductance is less.Iron core inductor: This inductor is used when greater value of inductance has to be generated. A iron material is wound with the wire(the coil) and iron being a magnetic material gets magnetized itself hence more flux is generated and it is not lost.The more Ferromagnetic material you use as a former(core), the greater is the flux linked with coil.
What is slag from welding?
Slag is the residue left on a weld bead from the flux. It shields the hot metal from atmospheric contaminants that may weaken the weld joint. Slag can also be globules of molten metal that are expelled from the joint and then re solidify on the metal surface. in either case, they are usually chipped away with a slag hammer.
How is a fuse different from a circuit breaker?
A fuse is used one time and replaced. A breaker can be re-set.
What does happi d capsules do?
Happi D tablets reduce the amount of acid in the stomach. They are used to treat acid re-flux, gas and heartburn symptoms.
What are disadvantages of thermo plastic?
Type your answer here... the cannot be re used and re moulded
What is the purpose of solder flux?
Very simply flux reacts with surface corrosion and washes it away, making the metal surface being soldered easier for the solder to wet and producing a more solid and reliable joint, both mechanically and electrically. Acid flux is more aggressive and acts faster than rosin flux, but must be washed off completely with water as soon as the joint cools because the acid will slowly attack the metal of the joint. As electronic circuits usually should not be washed with water, only rosin flux should be used on electronics because it can be left on the completed joint without damaging it.
How do you replace clutch on Ford Focus 20003?
look up Marty mcfly. he drives a silver deloreon and is usually seen with this crazy guy named doc. they,re on some wild flux capacitor type stuff. they might know.
What are the tools used in business process re-engineering?
What type of different tools are used for business process reengineering
Why is submerged arc welding referred as submerged?
Submerged arc welding is called "submerged" because the high voltage electrical current (called the "arc") that heats the metal and wire to weld together is submerged underneath layers of granular earth materials called "flux". About 50% to 90% of this flux can be re-used and fed back into the system with the proper equipment.
Why is submerged arc welding referred to as submerged?
Submerged arc welding is called "submerged" because the high voltage electrical current (called the "arc") that heats the metal and wire to weld together is submerged underneath layers of granular earth materials called "flux". About 50% to 90% of this flux can be re-used and fed back into the system with the proper equipment.
A type of re-usable solderless device used to make experimental models of electric circuits?
Breadboard
Having trouble sweating the shower joint in a temptrol shower valve?
You have the guts out of the control correct? Re clean the parts, flux and heat the body of the control.
What is the definition of 'flux' in regard to metallurgy?
Hi, I will try to put this in a simple term. Let us take the job of plumbing. We are installing (for clarity) a six inch cast iron sewer line, the preperations are all complete to pour a joint. (Molten Lead) The lead is heated to a liquid in what is called a lead pot, on top of this molten lead are impurities, this is called flux. The auto industry re-cycles old cars and different type of metal. When heated to the molten (Liquid) stage it has impurities (flux) floating on top, these impurities have to be discarded before the molten liquid can be used. I hope this has been of help to you. Have a nice day. John W. BairdI've not heard this use of the term flux. I'm familiar with two uses of the term flux in the context of metallurgy. First, flux is used to refer to a chemical agent used to remove surface oxides from metals to be joined, as in the case of flux-coated welding rods or flux pastes applied to metals that are to be brazed or soldered.The second use of the term is to refer to materials added to molten metals to allow impurities to float to the surface of those molten metals, to allow the mass of impurities to flow more freely, or to free trapped, molten metal from the mass of impurities. The impurities themselves are referred to, in aggregate, as 'dross' when in a solid state and 'slag' when in a molten state. A common example here is the addition of waxes such as parafin to lead melting pots--doing so can result in the nearly immediate surfacing of unwanted impurities which can then be skimmed off the melt.
What type of drill rig is used to re drill elevator holes inside an existing building?
These holes do not get re-drilled as they were never drilled in the first place. they are built and stay built. There is not "drill" to create them. If they get damaged or filled in, the building is in trouble and needs to be re-built, not re-drilled.
How do you dismantle PVC?
Saw it apart, then glue another coupling on to re-join it later.
