Want this question answered?
Metal-clad switchgear assemblies are the most common devices used in electricity distribution.
a type of switchgear used to connect distribution transformers
Low-voltage switchgear may be suitable for industrial or commercial use, so long as the distribution system does not exceed 600 volts.They may either be used alone or incorporated into a larger unit for secondary monitoring of power utilization.Be sure to always purchase switchgear from a trusted company, and research industry standard terms of use.
In an electric power system, switchgear is the combination of electrical disconnect switches, fuses or circuit breakers used to control, protect and isolate electrical equipment. Switchgear is used both to de-energize equipment to allow work to be done and to clear faults downstream. This type of equipment is important because it is directly linked to the reliability of the electricity supply.
12a
If you mean the fuse in the plug that connects to the mains... no more than a 5 amp fuse.
Your "T" type fuse (aka Edison type) has a base similar in appearance to a standard light bulb. Used mainly in older houses. The "S" type fuse (aka Tamper proof) has a smaller base and uses various sized adapters for the different fuse amperage ratings. In other words, a "S" type fuse rated at 20 amps would not fit into a socket that requires a 15 amp rated fuse.
A switchgear room is a room in a building which contains switchgear. It is typically a locked room in the ground floor of a building where the service enters the property. It would usually contain the supply authority's meters and the main protective devices (fuses, breakers) for the building's electrical installation. The room should not be used for storage or any other use.A different answerA switchgear room is an enclosed space - within an electrical power generating station or substation - in which are located high-voltage circuit breakers, protective relays, battery supplies, etc. The types of circuit breakers located inside switchgear rooms are indoor types and not suitable for locating in the substation compound. In the UK, these types of circuit breaker are typically metal-clad 11-kV oil circuit breakers (OCBs), and are supplied from primary (33/11-kV) transformers located in the substation compound and, themselves, supplied from outdoor-type 33-kV circuit breakers in the same compound.
difference between p type and n type semiconducter materialAnswerInsulation is used to prevent a short current. To protect the circuit should a short-circuit fault occur is either a fuse or a circuit breaker.
dnt noe!
Fuse wire is usually made with metal that has a low melting point, e.g. tin, to lessen the risk of fire.
A switchgear or electrical switchgear is a generic term which includes all the switching devices associated with mainly power system protection. It also includes all devices associated with control, metering and regulating of electrical power system. Assembly of such devices in a logical manner forms a switchgear.