0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you cut stainless steel?
Depending on the thickness and how nice you want the finished edge to look, steel can be:sawedshearedcut with an oxy-acetylene torchcut with a plasma cuttercut with a water-jetcut with an abrasive wheelcut with snips
Andrew carnegie gained control of large percentage of the steel industry by doing all of the following except?
Andrew Carnegie did not cut the quality of his products in the process of gaining control of a significant percentage of the steel industry. His net worth, in today's dollars, was $298.3 billion.
What is the difference between carbon steel and mild steel?
Carbon steel includes mild steel. Mild carbon steel(as it is referred to) contains .05 - .29% carbon. Medium carbon steel is from .30 - .59%. High carbon steel is from .60 - .99%. Ultra high carbon steel is from 1.00 - 2.00%. Steel is considered carbon steel up to 2.1%. Past that it is considered cast iron. The more carbon in the steel the harder and less ductile and maleable it is and also the more brittle it is. The less carbon in the steel more it will bend and shape without breaking. So in essence carbon adds strength but takes away from its elasticity. For More Details Plz Visit at: steelmkts.com (Like, Ms Ingot, Scrap, Sponge Iron, Pig Iron, TMT, Rebars, Iron Ore, Wire Rod, Angle, Channle, Girder, HR/CR Coils, Billets, Iron Pellets, Rolling, Metals,etc. Prices) OR Call +91-98888-14974 Iron & Steel Price in Mandi Gobindgarh, Steel & Iron Prices Of Ludhiana, Iron & Steel Prices in Mumbai, Steel Prices in Maharashtra, Steel & Iron Prices of Jammu, Iron Prices of Kolkata, Steel & Iron Rates in Durgapur, Steel & Iron Rates in Bangloure, Steel & Iron Rates in Bhavnagar, steel price in Tamil Nadu, Steel & Iron Prices in Chennai, Iron Price in Ahmedabad, steel price of Alang, Iron rates of Ghaziabad, Steel & Iron Price in Hydrabad, steel prices of Jaipur, Iron and Steel Prices in Bhiwari, steel price of Mujaffarnagar, iron & steel Rates in Raipur, iron prices of Rourkela, steel prices in Raigarh, Steel Prices of Nagpur, Iron & steel prices in Orissa
What are the conditions that favor the formation of built-up edge?
One of the conditions that favor the formation of a built-up edge is low cutting speed. The metal being cut should also work-harden and should be reluctant to recover such as alloys like steel.
Can you solder cold rolled steel?
I have found through experience that hot rolled steel will take 95/5% solder, and that cold rolled will not solder, reason is the cold rolled steel molecules are arranged differently that the hot roll, they are so to speak pushed into the final dimension with extreme pressure this also causes a so called hardened tempered surface on the cold roll steel that has to be annealed so that it can be drilled. cut or soldered.
What is a right hand knife tool lathe?
it is a tool used on a lathe to cut metal from right to left
All types of tool bit in lathe?
Left Cut Right Cut Round Nose Sharp V Parting Tool
How big is this angle for tools used to cut mild steel?
The angle of the cutting tip used to machine mild steel on a lathe is 55 to 80 degrees depending on the surface roughness, size of the cut and type of finish required.
What is the difference between wood lathe machine and wood lathe duplicator?
A lathe has one workpiece spinning on an axis, which the operator holds a tool to to cut the material. A duplicator has two workpieces, and a probe touching one piece causes a tool to cut in to the other, creating a duplicate of the probed piece.
Can diamonds cut through steel?
Yes, a diamond-tipped tool can cut through steel.
What is a tool used to cut pipe?
There are many types of tools that will cut steel. Band saw blades cut steel bars ad billets into pieces to be fabricated. End mills, gear cutters and lathe cutting tools fabricate the steel into some sort of tool or part. These blades, cutters and tools are usually made from some type of high speed steel. Common grades include M-2, M-4, M-48 and T-15. These steels are formed into a cutting tool with many different cutting configurations, but all of them will include some sort of tooth or cutting edge that has been fabricated to a sharp edge and heat treated to withstand high temperatures created by the friction between the tool and the work surface. For a more in-depth explanation of high speed steels, their uses and heat treating, see the related link.
What tool should be used to cut virgin threads on a steel shaft?
A Die
What is meant by pitch measurement in lathe?
Pitch measurement refers to the distance from one thread to the next when threads are cut on a lathe. Different threads have different pitches and a lathe can be set to to cut to any specified pitch. This is achieved by selecting the pitch and engaging the lead screw on levers located on the headstock, then engaging the half-nut around the lead screw from the apron. With the correct threading tool inserted threads can be cut into the workpiece.
Why is it necessary that the tool be clamped tightly in the tool post?
If the cutting tool is not tightly clamped in the tool post it could move when a cut is taken. This can result in the tool penetrating the workpiece as the cut progresses causing an undersized workpiece. It can also eventually bite into the workpiece and possibly cause damage to the workpiece, the lathe, the cutting tool and even injury to the machinist and others in close proximity.
What is the difference between cutting speed feed rate depth of cut?
Feed of a cutting tool in the lathe is the distance of the tool advances for each revolution of the work.The depth of cut is the perpendicular distance measured from the machined surface to the uncut surface of the work piece.
Why is it usually necessary to take light feeds and depths of cut when boring on a lathe?
Four reasons: hard feeds and depths of cut result in rough cuts, which take a long time to sand they also load down the lathe, which can damage the motor and bearings and they overheat your tools, which could burn your hands If you REALLY get unlucky, you could get a "catch," where the tool stops the workpiece. Catches are very dangerous--they can cause the tool to fly out of your hands, break your wrists, or even cause the workpiece to come off the lathe.
What does changing the gears on the center lathe do?
Changing the gears on a lathe enables it to cut certain pitches of threads.
