What type of metal roofing is put on existing shingles?

What type of shingles does the GAF roofing supply company sell?

The GAF roofing supply company sells top-of-the-line Timberline asphalt shingles. These shingles come in a variety of colors and styles for one to choose from.

What supplies are needed for roofing?

There are many different materials that are needed for roofing such as a hammer, a utility knife, a level, shingles, and nails. The supplies needed for roofing vary greatly depending on the type work that a person is planning to do such as placing shingles on a roof or simple re-tarring areas of the roof.

How is metal for roofs produced?

Their are several ways metal roofing is produced, depending in the type of metal roofing. The most popular type of metal roofing are panels. These panels are created beginning with a roll of painted or coated steel. This roll is ran through a series of steel rollers on a roll-former, which give it the ribs that provide the panels' strength. There are also other types of metal roofing, such as those that look like shingles, slate, and tile. These are formed in several ways, the most popular being a form press, giving flat panels the shape of the various materials. These are sometimes coated with a stone chip process for a greater durability and attractiveness.

What are are the most common type of roof shingle?

The most common type of roof shingle is asphalt shingles, favored for their affordability, ease of installation, and variety of styles and colors. They typically come in two main types: three-tab and architectural shingles, with architectural shingles offering a more dimensional look and greater durability. Other types of roof shingles, such as wood, metal, and tile, are also available but are less commonly used. Overall, asphalt shingles dominate the residential roofing market.

How to repair different types of roofing?

Roofing repairs are needed when a roof system is leaking, or the roof has been damaged in some way, such as a fallen tree or high winds. The type of roofing will dictate the materials and the method of repairs, so it is first necessary to determine which type of roofing is in place. Once the type of roofing has been established the materials can be purchased. There are typical procedures that are used for repairing different types of roofing.Wood shingles will dry out and crack over time and when this happens, the roof will leak. The repair can be accomplished by replacing a section of the roof or by repairing the leaky sections using aluminum shingles. Aluminum shingles can be slid under the wood shingles and will act as another surface to ship water. The holes can be spotted from below, in an attic area, and the daylight that seeps through will signify where the aluminum shingles need to be inserted. If the leak is confined to an area of damage, remove the damaged shingles and re-roof that area. Be sure to lace the new shingles into the existing to ensure the roofing system is continuous.Composition shingles cannot be patched in any way that will make a suitable repair. To repair a composition shingle roof, remove the damaged singles in an area larger than the actual damaged area, in order to allow for lacing into the old roofing. Be sure to apply two layers of felt roofing paper to the roof sheathing before installing the new composition shingles. The new shingles can be attached using staples or galvanized roofing nails.Spanish tiles and concrete tile roofing will break when hit by hard objects. When this happens it is necessary to remove and replace the damaged tiles. Be sure to extend the area of repair outward from the damaged section in order to ensure a suitable repair. In addition, it will be necessary to replace the heavy moisture barrier under the tiles. The area of the new barrier should overlap the existing moisture paper to ensure a good under-lay system. Roofing tiles are held in place using a single, galvanized nail that is made for the particular tile. A qualified salesperson will be able to recommend the correct nails to use for a particular type of tile. Do not walk on the new roofing tiles once they are in place, as this could cause them to crack, which will result in further repairs.

Do you have to use wood strips on roof before metal roofing is applied?

Whether you have to use wood strips on metal roofing will depend on several things:The type of metal roofing. Most types of metal roofing do not require wood strips although strips can be used. Other types must be placed on wood strips, and some types of metal roofing cannot be placed on wood strips.Whether the metal roofing is going over an existing roof. if you are going over an existing shingle roof, you will need to put something between the existing roof and the metal roofing, such as wood strips or 30 lb felt.Wind requirements. in general, your roof will be more wind resistant by going down over the solid decking vs. the wood strips, which will not be as wind resistant.Ventilation. The use of wood strips will allow the panels to breath better, reducing the change of condensation (water droplets) building up on the bottom of the panels.Straightening out the roof line. You can shim wood strips up to reduce and eliminate sag lines in the roof if your plywood is wavy, or uneven.When installing the most popular 3' wide metal roofing, many contractors choose to install wood strips first, but in most cases, you don't have to.

What was the price of roofing shingles in the 1980's?

Well, honey, prices vary depending on the brand, quality, and location. But back in the 1980s, you could expect to pay around $20 to $30 per bundle of roofing shingles. Of course, inflation and other factors have likely changed that price since then. But hey, at least now you have a rough idea, right?

What are some quality roofing materials?

The best kind of roofing material to use will depend on the type of roof you're working on. The standard combination of tar, sealant and shingles will work great on most homes.

What is foot span?

A foot span is a term used in the roofing industry to calculate the area of a roof. It is necessary to calculate how many shingles per foot. This measurement will vary depending on the type of shingles used.

What is Roof Repair Services?

Your roof might get damaged for a variety of reasons and might allow damaging agents such as moisture and dust to enter your home. Furthermore, other roofing materials are damaged by various agents and require different kinds of repairs. Regardless of the type of roofing material you use, whether it is clay tiles, concrete shingles, metal panels and seams, synthetic roofing, slate shingles, or any other roofing material available, you must maintain and repair your roof over time so it can continue to deliver excellence. In Courtenay, BC, Ironwood Shake & Tile provides metal roofs for homes and businesses. With our company, you can be assured that you will receive high-quality roofing services. It is my hope that this information will be helpful to you in answering your question.

roof cleaning services?

form_title=roof cleaning services form_header=10863 Please state the number of stories your house has.*= () One story () Two stories () Three stories or more What type of roofing material do you have?*= [] Tar and gravel (flat) [] Asphalt shingles [] Wood shingles or shakes [] Tile [] Metal [] Other [] Don't know

Is metal roofing a type of aluminum?

Metal Roofing is available in many different metals. You can purchase metal panels that are made from aluminum, copper, zinc, steel and more. The most common and economical roofing panels today are made from steel, usually coated with a protective substrate like Galvalume.