spur
Spur Gears.
If it goes up just some, it could be considered a ramp, or inclined plane. Otherwise it is not any sort of simple machine. Good question though:)
increase the rpm
Type your answer here...These are used in speed reducers, clocks and machine tools.
Positive Displacement meters like piston, gear etc
A lever.
a flag pole is a pulley
block and tackle
epicyclic gear train
Spur Gears.
pulley
A lever or a form of it such as a gear, screw, inclined plane, or pulley can be used to increase force at the expense of distance traveled and/or elapsed time.
The higher the amount of gear reduction, produces the most torque. The type of gear system usually used is a planetary type, due to its ability to withstand the strain.
Upper pulley - remove nut on generator shaft. The nut, bell-shaped washer, extra shims, pulley half, used shims, and inner pulley half come off in that order. More shims between the pulley halves will loosen the belt. Fewer shims will tighten it. Put the leftover shims under the bell shaped washer so they'll be around when you put on a new, tight belt. Lower pulley - Put the car in 4th gear and remove the bolt (it's right handed) If the pulley is really stuck, you might need a gear puller to get it off.
80w90
Depends on what type of vibration damper (crankshaft pulley) you have. Your local auto parts store probably has the one you need and can rent it to you.
To open cans.