Static routes
Dynamically, as related to a routing protocol is a type of networking technique whereby the routing protocol creates, updates and maintains the dynamic routing table.
link-state routing protocol
It is a protocol which tries to find route from source to destination only on-demand...This type of protocols finds a route on demand by flooding the network with Route Request packets. The main disadvantages of such algorithms are:High latency time in route finding.Excessive flooding can lead to network clogging.
aodv
Routing is of two types static and dynamic . In dynamic routing there are two protocols interior and exterior. Interior routing is inside an autonomous system and Exterior routing is between an autonomous system.RIP is short for routing information protocol. RIP is an interior protocol that is used inside an autonomous system.
In a distance vector routing protocol, such as RIP or EIGRP, each router sends its routing table to neighboring routers. The routers don't know the topology, i.e., how other routers are interconnected. In a link state routing protocol, such as OSPF or IS-IS, routers first exchange information about connections within the network (or an area of the network), and build a topology table. Then each router uses Dijkstra's algorithm to calculate the best route to each destination.
what type of static route does the administrator configure
The default route must be configured such as: Ip route 0.0.0.0 0.0.0.0 serial 0/0 etc.
OSPF is short form of open shortest path first. OSPF is based on linked state routing.
Answering "If a router recieves a packet that is does not know how to foward what type of route must be configured on the router to prevent the router from dropping it?"
Open Shortest Path First (OSPF) is a type of routing protocol known as an interior gateway protocol or an interior routing protocol. The routers in an internet are responsible for receiving and forwarding packets through the interconnected set of networks. Each router makes routing decisions based on knowledge of the topology and traffic/delay conditions of the internet. The routing protocol between routers is used to exchange topology and traffic delay information. An interior routing protocol is used within a portion of the internet called an autonomous system, which simply means a connected set of routers that are managed by a single organization. OSPF is the most commonly used interior routing protocol.
Classful.