Want this question answered?
You do not need tape on any flared fitting, brake or regular. The brake line and the fittings are different size and thread type than regular copper line and fittings. You can't mix them.
That is not a unit of measure but a type of design .
If you have the type of fuel lines that thread into the filter, yes. Knowing what year S10 you have would help.
Pex fittings are used for making connections in PEX plumbing applications. Professiomnal plubmers used next type of PEX fittings: Crimp fittings, Clamp fittings, Push Up fittings, Sharkbite fittings and others.
what type of fittings are allowed in a class2 division 1 hazard area
Put a dye type refrigerant and watch for leaks at fittings, hoses, and compressor Put a dye type refrigerant and watch for leaks at fittings, hoses, and compressor Put a dye type refrigerant and watch for leaks at fittings, hoses, and compressor Put a dye type refrigerant and watch for leaks at fittings, hoses, and compressor
its underneath the inlet manifold. its a black steel canister type about 100mm long & about 40mm diameter, has banjo bolt type fittings as opposed to push on hoses and clamps.
acetylene supplier thread
Use heavy polyesther thread.
Location of fuel filter on VT CommodoreThe fuel filter is located behind the fuel tank, right near the differential. It is attached to the chassis via a plastic clip, and is a metal in line type. Cost about $20 to replace. Just ensure you purchase the correct one, as the fuel line has special fittings to stop any leakage.
You click 'New Thread' Type the name what you want then press creat thread
You click 'New Thread' Type the name what you want then press creat thread