Most tungsten electrodes are usable with aluminum. However, pure (EWP) and zirconiated (EWZr) are recommended. This is because aluminum should be welded with alternating current (AC.) EWP and EWZr are the most easily balled electrodes, meaning at the end of the electrode there should be a hemispherical tip about 1.5 times the diameter of the electrode.
nothing
Iron is formed with aluminium oxide. The reaction is used for welding iron (steel) components.
Oxy-Gasoline is an effective fuel and is very good when traditional gas bottles are not available. Hydrogen is a good fuel when welding aluminium but is not used when welding steel because it damages the steel. Propane, butane and butane/propane mixes are also used.
tungsten used protecting human brain
Actually tungsten is a great conductor of heat and electricity. Tungsten is used a light bulb filaments. If Tungsten was a poor conductor of heat and electricity the bulb in the circuit would not glow because there wouldn't be electricity passing through the circuit. Tungsten is also used as an electrode in gas tungsten arc welding. Electricity passes through the tungsten (negative) and moves to the workpiece (positive) for most applications.
nothing
why oxyacetylene filler rods cannot be used for gas tungusten ar welding
ER70S-6 is a very common filler metal when welding with Gas Metal Arc Welding or Gas Tungsten Arc Welding on a low carbon steel (mild steel). This can be purchased as a spool or in rod form.
Iron is formed with aluminium oxide. The reaction is used for welding iron (steel) components.
Tungsten Inert Gas (orTIG) welding is also referred to as GTAW (Gas Tungsten Arc Welding) and by the term Heliarc® which was the Linde Company's trade name for the TIG process when it was originally introduced.The welding arc is started with a sharply pointed tungsten electrode shielded by inert gas. A separate filler rod is fed manually into the weld puddle in much the same way as is done when gas welding.The process is well suited for aluminum.
High frequency stabilized alternating current power supply is the most used GTAW process for aluminum with pure tungsten electrodes.
Tungsten Inert Gas (TIG)
What type of welding can we use LPG ?
There are no , non -consumable electrodes, there are slower consumed electrodes, as in TIG (tungsten inert gas) welding in which a Tungsten electrode is used , and in the hands of a very skilled welder , last the longest of all electrodes , but are in the end consumed.
For welding 8 mm thickness metals, common methods include MIG (Metal Inert Gas) welding, TIG (Tungsten Inert Gas) welding, and stick welding (SMAW - Shielded Metal Arc Welding). The choice depends on the type of metal and specific requirements.
tungsten carbide
tungsten <<>> Also along with the above, aluminium for the shell, steel for the filament holders, and in past years brass was used for the shell until manufactures found out it was cheaper to use aluminium for the job.