When the correct amount of Oxygen is mixed with the Acetylene a NEUTRAL flame is produced. Less than that amount produces a CARBURIZING flame. Too much Oxygen creates an OXIDIZING flame. Most welding/cutting is done with a NEUTRAL flame but all flame adjustments have their purpose.
Mixing Acetylene and Oxygen in the correct proportions produces an extremely hot flame. Using just enough Oxygen so that the Acetylene is almost completely consumed in the flame is called a Neutral Flame. In most welding and cutting applications you would utilize this flame. Reducing the amount of Oxygen produces a Carburizing Flame. It is yellowish and not as hot as a Neutral Flame, but, is used in certain situations. Welding Aluminum is one. Increasing the Oxygen produces an Oxidizing Flame. It produces a flame that is pointed, colder, and louder than a Neutral Flame. It wastes fuel and isn't as efficient as a Neutral Flame.
The two types of flames a Bunsen burner can produce are a luminous, yellow flame and a "roaring" blue flame. The blue flame is much hotter than the yellow flame.
yes there is a flame at the top of a Bunsen burner. there are three different types light blue blue and yellow
The vapor has a sexual reproduction of air to wicks and waxs.
Im Only 14 But I Hope This Helps A Good Bunsen Burner is used in laboratories to heat things. A Bunsen burner can produce 3 different types of flames: The "coolest" flame is a yellow / orange color. It is approximately 300°C. It is never used to heat anything, only to show that the Bunsen burner is on. It is called the safety flame, The medium flame, also called the blue flame or the invisible flame is difficult to see in a well-lit room. It is the most commonly used flame. It is approximately 500°C, The hottest flame is called the roaring blue flame. It is characterized by a light blue triangle in the middle and it is the only flame of the 3 which makes a noise. It is approximately 700°C. The Flame Changes Colour Depending On The Air Hole Thingy On The Bunsen Burner.
Mixing Acetylene and Oxygen in the correct proportions produces an extremely hot flame. Using just enough Oxygen so that the Acetylene is almost completely consumed in the flame is called a Neutral Flame. In most welding and cutting applications you would utilize this flame. Reducing the amount of Oxygen produces a Carburizing Flame. It is yellowish and not as hot as a Neutral Flame, but, is used in certain situations. Welding Aluminum is one. Increasing the Oxygen produces an Oxidizing Flame. It produces a flame that is pointed, colder, and louder than a Neutral Flame. It wastes fuel and isn't as efficient as a Neutral Flame.
There are far more than 5 types or processes of welding. Currently the American Welding Society (AWS) states that there are more than 80 different welding and joining processes. However, some of the common welding processes include shielded metal arc welding (SMAW), gas metal arc welding (GMAW), gas tungsten arc welding (GTAW), flux cored arc welding (FCAW), and oxyfuel gas welding (OFW).
EFW: Electric Fusion Welding is a more general term which includes Electric resistance welding (ERW) and other types of welding such as Arc welding.
Blue Flame=Can't see (hotter then yellow flame) Yellow Flame (safety flame)=visible
2 basic types, Gas shielding, and flux shielding. Gas shielding comes from compressed tanks of inert gas such as argon. these gases are pumped through the welding hose and over the weld pool. The flux type protects the weld by covering it in a layer of slag that prevent it from being contaminated by the surrounding air.
In Pressure Welding the parts(work pieces) to be joined are heated only up to the plastic state and then fusedtogether by applying the external pressure.the two different types of pressure welding are:forge welding and resistance welding
Gas, arc, mig and tig.
there are one types of weilding is weilding.
Read here under this section, very informative: http://en.wikipedia.org/wiki/Welding#Processes
It is a good idea to purchase and utlize a welding fume extractor. There are different types of welding fume extractors and brands available for purchase.
Branson Ultrasonic offer welding technologies. For example, they offer Linear Vibration Welding, Orbital Vibration Welding, as well as many other types of welding tehcnologies.
it is not a question of which is better. the welding types are chosen according to our own requirements