Want this question answered?
If a workpiece is receiving damage in its environment, a vice jaw plate can help to ensure that the technology or equipment receives less impact by absorbing any shock or negative hits.
I have special clamps similar to Vice Grips for this.
Vice mens, 1.A holding device attached to a workbench; has two jaws to hold workpiece firmly in place 2.A specific form of evildoing "vice offends the moral standards of the community" 3.Moral weakness
Depending on the size and volume of the workpiece. Vee blocks are used alot in machining, G-clamps are good for plate. A vice could be used for more heavy work pieces. Jigs and fixturing are a very good practice but are extremely costly to produce.
The jaws of a vice used in metal working have small teeth like segments cut into them to assit in gripping metal. If you use the vice for soft metals such as copper or brass the jaws will leave indentation the in the metal which will prove very difficult to polish out. plain jaws or plates are added to stop this. The same would occur if you use these types of vices to grip wood or plastic.
The xbox 360 can badly damage disks if you tilt the xbox from horizontal to vertical (or vice versa) making them to the point of unreadable
1) The methods for holding a securing a work piece during marking out activities are making sure that the piece is secured to a vice firmly so it will not move when marking it, or if you are using a Vernier height gauge, make sure you are holding it securely against the angle plate and assure it is flat against the base so it is accurate when marking it.
If gasoline is used in a diesel it will damage the engine. If diesel is used in a gasoline engine it will do no real damage as the engine will not run.
Martin Van Buren
The people who protect the U.S. President, Vice President and their families are called the Secret Service.
Martin van Buren
Neither would run correctly if at all. Both could suffer major damage.