Depending on the size and volume of the workpiece. Vee blocks are used alot in machining, G-clamps are good for plate. A vice could be used for more heavy work pieces. Jigs and fixturing are a very good practice but are extremely costly to produce.
A gear hobber is a cutting tool for machineries. It is used to make gear teeth into the workpiece to help in chip removal and cutting.
It would depend on the environment in which the equipment is being used
An equipment is any laboratory experiment material which mechanically uses current like a pH meter,electric weighing machine etc while apparatus is any other laboratory experiment material which doesn't mechanically use current like thermometers ,burette ,pipette,
Describe the various hardware equipment used in cad/cam?
· Most equipment used within the Engineering industry is accurately calibrated and designed to carry out a specific operation/s · If this equipment is misused, then errors could occur during measuring and marking out operations · It is important to always check the accuracy of equipment such as verniers and micrometres before use to avoid scrapped work. Tools and equipment used in a manner that is not within their specification can and does cause accidents and injury which, if investigated can bring about prosecution
A vise
A bench dog is a device used on a woodworking bench to hold a workpiece in place.
An iron clamp is a type of apparatus used in the lab. Often used to hold burrettes
= Lab equipment used to support filter paper would be a Funnel =
Vee clock is a kind of equipment used to hold circular workpieces. By clamping the the workpiece on it we can finder centre of the workpiece very easily as jt has a right angle slot in it. It can be also used for check the roundness of a circular job using a dial indicator.
A forge is a type of hearth used for heating metals, or the workplace also known as smithy where such a hearth is located. The forge is used by the smith to heat a piece of metal to the extent of a temperature where it becomes easier to shape by forging. The workpiece is transported to and from the forge using tongs, which are also used to hold the workpiece on the smithy's anvil while the smith works it with a hammer. Sometimes such as when hardening steel or cooling the work so that it may be handled with bare hands; the workpiece is transported to the slack tub, which rapidly cools the workpiece in a large body of water.
a support ring is used to hold big objects.
Quiver is equipment used in archery.A quiver is a piece of equipment in archery. It is used to hold the arrows.
JIGS: Jigs are used to hold the work piece, and also to guide the tool while performing the operation. Jigs are mostly used for drilling operations. FIXTURES: Fixtures are used only to hold the workpiece and not to guide the tool. Fixtures are mostly used for milling operations.
What is the angle of a workpiece if a 3.2003 gage block stack is used with a 10 sine bar?
There are various ways for a lathe to hold its workpiece.The workpiece could be held between centers from the spindle and tail stockIt could be gripped in a chuckA faceplate could be used and the workpiece is screwed, bolted or clamped to it.
Also known as a Retort Stand, the Stand and Clamp is used to hold or support apparatus (equipment) during experiments.