0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How may watt does a load of 3570 watt draw from an UPS of 2010 watt?
If the load wattage is 3570 watts then that is what the load wattage draws. Now by using the expression "draws" maybe you meant to say amps. If it is amperage that you are looking for then the answer can not be given without knowing what the voltage of the system the UPS is tied into.The equation to use is A = Watts/Volts.If a UPS nameplate output rating is 2010 watts then that is the maximum that the UPS is designed for by the manufacturer. Applying a greater load that what the UPS is rated for will void the warranty. Match the load wattage to the UPS's output when calculating what size is needed to operate correctly. This can be done by adding up all of the device wattages that will be connected to it. If the device does not have a wattage shown use the equation above to find the wattage.
What are the voltages supported by a UPS power supply in the US?
The voltages supported by a UPS power supply in the US ranges from 50Hz, 60Hg or 400Hg frequency conversions. This may not be an exact answer to the question.
Can you use safely an stand alone under the desk ups to power up your computer even when you already have a building ups?
There's no reason why not - although, if the whole building is already supported by a UPS, the one under your desk would be irrelevant !
How much wattage output should a UPS have in the event of a total blackout?
Wattage is determined by multiplying amps by voltage: ergo, a 2.5 amp draw system in a standard 120v (US) home will require a minimum of 300watts, and any good tech will add 20-30% to that figure for a 'safety' cushion; in this case add 90watts for a total of 390watts output needs of the system. Don't forget in this case (total blackout), you need enough wattage to include the monitor along with the system itself. Oh, and do not keep any printers or similar devices on the UPS!
How do you find the actual wattage of an electrial component?
Wattage= current*voltage*power factor. Wattage=VI Cos(@)
Do the same wattage candelabra and incandescent bulbs draw the same power?
Yes, wattage is wattage, is wattage, is wattage. "Power" is calculated in wattage. It equals the voltage times the current in amps. In a light bulb, the resistive filament will cause a certain amount if current to flow making the filament hot and producing light.
What is the wattage of tea boiler?
The wattage can vary depending on manufacturer, capacity, model, etc. The wattage will be stated on a label fastened to the boiler.
Can a CFL tube light on UPS supply if so how?
It is possible to power any electrical device i.e. assuming that the electrical device is in disabled or off condition only if the UPS has the option of cold start. The actual run time will depend on the load ( wattage ), on a average basis a 40 w CFL can be powered for about 45 minutes using a 500 VA 300 W UPS. Maximum Load that can be handled will depend on the ratings of the UPS. A UPS with the ratings as mentioned earlier will not handle loads greater than 300 W. Regards.
How do you determine Uninterrupted Power Supply size?
The load size in watts is what determines the size of UPS needed. Add up all of the load wattages that you would like to have an uninterrupted power supply. Some UPS units are rated in VA output, for the purposes of this calculation VA is the same as watts. There are many UPS calculators on line if you need any help deciding what to connect to it. Remember the larger the UPS the more the cost is going to be. Read the discuss page for calculator.
What the use of computer UPS?
A computer UPS (Uninterruptible Power Supply) is designed to provide power to a computer system if normal power fails. The length of time a UPS will support a computer depends on the capacity of the UPS and the draw of the system being supported. Properly configured and installed, most systems will monitor the UPS and begin a normal shutdown when notified by the UPS that a power outage is in process. Some are large enough to maintain computer operations long enough for backup power generation to come online.
A ford explorer preamp has how many watts?
NO preamp has wattage or a wattage rating. The only wattage involved in a sound system comes from the POWER amp
What would be the maximum rating of the incandescent bulb for a dimmer switch?
Find the wattage rating on the dimmer controller. This is the maximum allowable wattage that the lamp in the fixture should be. Lamp wattage ratings under the rated dimmer wattage is fine but do not install a larger wattage lamp that is over the dimmer control's rating.
