0
First of all, what voltage are you going to use and second, what is the horsepower of the motor?
Wiki User
∙ 18y ago
Add your answer:
Earn +20 pts
What is the Fuse rating of an electric hand drill?
It depends on the motor size. If 750 watts, then, 750/240 = 3.125. So use the next size up - 5A fuse
Where is the fuse for electric fan motor?
where is the fuse located for electric engine coolant fan on picasso petrol 1.6l
What size fuse required for 11kw motor star delta starting?
This depends on the motor rating.
Why should a fuse of defined rating not be replaced with one with larger rating?
The fuse is rated to protect the equipment, the supply, and you. Change the fuse for a higher rating and you compromise your safety and equipment and supply safety; increasing the risk of electric shock and of fire.
What is used in an electric fuse?
That depends on the KW rating . You should consult a qualified electrician
What fuse is used in an electric shower?
That depends on the KW rating . You should consult a qualified electrician
What is the correct fuse rating to provide short-circit protection for a 100HP 200V 3-0 wound-rotor motor?
what is the correct fuse rating to provide short-circit protection for a100 HP 200V 3-0 wound-rotor motor
Is there a fuse for the electric motor that engages the four wheel drive on your 1997 gmc jimmy?
yes there is its on the lower left side of the fuse panel its a 20 amp fuse.
It is ok to use a fuse with a higher amperage rating and not ok to use a fuse with a smaller amperage rating why?
It is ok to use a fuse with a higher amperage rating and not ok to use a fuse with a smaller amperage rating why?
How do you calculate fuse size in a 150hp 3 phase 600V motor?
find the line current first... i=(150*735.5) / (sqrt(3)*600*0.8) assume pf of 0.8 the current value gines u reqd fuse rating
Discuss the special feature for selecting the fuse rating for the protection of motor?
The starting current of a motor is usually much higher than the normal current of that motor's full load condition. So for the protection purpose, in case of selecting fuse, the fuse has to be rated 2-3 times the full load of the motor so it does not blow on start. An induction motor will have a starting current of around 6 times FLC.
What do fuses do?
Structure and use of a fuse: A fuse contains of a metal contact cap,glass casing,thin metal wire with a low melting point.When the electric appliances is faluty,the excess electric current will flow through the crcuit.Owing to the heating effect of elecric current,a large amount of heat will be produced.The circuit may thus occured a fire.The installation of fuse can stop excessive electric current.the low melting point thin wire in the fuse will melt and break the circuit in order to protect the electric appliances and prevent a fire.But fuse is quite unconvenient that after it's bruned out,you need to replace a new one. fuse rating: fuse rating refers to the amount of electric current that can flow through the fuse without melting the thin metal wire.The higher rating can provide larger electric current.We should choose a greater ampere fuse than the electric appliances in order to prevent the breaking of circuit when electric appliances are working normally. The similar appliances:Circuit Breaker The use of a circuit breaker is similar to a fuse.When an electric current increases suddening and exceeds the circuit breaker's raging,the circuit breaker will turn to"OFF" switch automatically and break the circuit in order to protect the electric appliances and prevent a fire.It's more convenient than a fuse cause you only need to turn to"ON"switch when reconnected.
